IC693CMM311   通信协处理器模块   90-30 系列模块化 CPU 

产品描述

GE Fanuc IC693CMM311 是一款通信协处理器模块。该组件为所有 90-30 系列模块化 CPU 提供高性能协处理器。它不能与嵌入式 CPU 一起使用。这包括型号 311、313 或 323。该模块支持GE Fanuc CCM通信协议、SNP协议和RTU（Modbus）从通信协议。可以使用配置软件配置模块。 或者，用户可以选择默认设置。它有两个串行端口。端口 1 支持 RS-232 应用，而端口 2 支持 RS-232 或 RS-485 应用。两个端口都连接到模块的单个连接器。因此，该模块配备了星形电缆 （IC693CBL305），以便将两个端口分开，使接线更容易。

技术规格

模块类型：通信协处理器

通信协议：GE Fanuc CCM、RTU （Modbus）、SNP

内功率：400 毫安 @ 5 伏直流电

通信端口：  

端口 1：支持 RS-232

端口 2：支持 RS-232 或 RS-485

GE Fanuc IC693CMM311通信协处理器模块用作扩展处理器，专门负责 90-30 系列模块化 CPU 的外部通信，特别是与 311、313 或 323 型号的通信。GE Fanuc IC693CMM311通信协处理器模块支持的一些通信协议是 GE Fanuc CCM、SNP 和 RTU Modbus 协议。串行端口 2 能够根据需要接收 RS-232 或 RS-485 通信。连接 RS-232 或 RS-485 协议需要单独出售的星形电缆（部件号 IC693CBL305），因为两个串行协议共享同一个连接端口。串行端口 1 专用于 RS-232 应用。额定工作电压为 5 伏直流电，从 PLC 背板汲取，额定电流为 400 毫安。

GE Fanuc IC693CMM311通信协处理器模块易于配置，只需在带有PCI卡的个人计算机上使用专有的手持式配置工具或专有软件即可进行配置。通信协处理器模块上唯一可见的指示灯 LED 是“MODULE OK”LED 和两个串行端口的状态 LED。如果模块不运行，GE Fanuc IC693CMM311 通信协处理器模块的“MODULE OK”LED 将熄灭，模块正常工作时将亮起，并且在通电诊断期间会一直闪烁。控制最常见通信过程的所有必要信息都预加载到设备上，因此无需额外的定制即可在拆包后立即启动并运行模块。

Product description

GE Fanuc IC693CMM311 is a communication coprocessor module. This component provides high performance coprocessors for all 90-30 series modular cpus. It cannot be used with embedded cpus. This includes models 311, 313 or 323. The module supports GE Fanuc CCM communication protocol, SNP protocol and RTU (Modbus) slave communication protocol. Modules can be configured using configuration software. Alternatively, the user can select the default Settings. It has two serial ports. Port 1 supports RS-232 applications, while port 2 supports RS-232 or RS-485 applications. Both ports are connected to a single connector of the module. Therefore, the module is equipped with a star-shaped cable (IC693CBL305) in order to separate the two ports and make wiring easier.

Technical specification

Module type: communication coprocessor

Communication protocols: GE Fanuc CCM, RTU (Modbus), SNP

Internal power: 400 MA @ 5 volts DC

Communication port:

Port 1: Supports RS-232

Port 2: Supports RS-232 or RS-485

The GE Fanuc IC693CMM311 Communication Coprocessor module is used as an extension processor and is specifically responsible for external communication of the 90-30 series modular CPU, especially with the 311, 313 or 323 models. Some of the communication protocols supported by the GE Fanuc IC693CMM311 communication coprocessor module are the GE Fanuc CCM, SNP, and RTU Modbus protocols. Serial port 2 is capable of receiving RS-232 or RS-485 communications as needed. Connecting RS-232 or RS-485 protocols requires a separately sold star cable (part number IC693CBL305) because both serial protocols share the same connection port. Serial port 1 is designed for RS-232 applications. Rated operating voltage is 5 volts DC, drawn from the PLC backplane, rated current is 400 mA.

The GE Fanuc IC693CMM311 communication coprocessor module is easy to configure using a proprietary handheld configuration tool or proprietary software on a personal computer with a PCI card. The only indicator leds visible on the communication coprocessor MODULE are the "MODULE OK" LED and the status leds for the two serial ports. If the MODULE is not running, the "MODULE OK" LED of the GE Fanuc IC693CMM311 communication Coprocessor module will go off, light up when the module is working normally, and will keep blinking during power-on diagnosis. All the necessary information to control the most common communication processes is pre-loaded onto the device, so modules can be up and running immediately after unpacking without additional customization.