IC693MDL240G  120伏交流输入模块  用于 90-30 系列可编程逻辑控制器

产品描述

IC693MDL240G是GE Fanuc的120伏交流输入模块。它适用于 90-30 系列可编程逻辑控制器。该模块有 16 个输入点，共享一个公共电源输入端子。这 16 个电路是无功输入——它们有一个电阻和一个电容器。当有电流进入输入点时，输入状态表 （%I） 中将读取逻辑 1。输入模块可与一系列不同的输入设备配合使用。例如，用户可以使用限位开关或按钮以及电子接近开关进行操作。

技术规格

额定电压：120 伏交流电

# 输入：16

频率：50/60赫兹

输入电流：额定电压下为 12 mA

隔离：现场侧和逻辑侧之间的 1500 V RMS

直流电源：不

IC693MDL240G交流输入模块是属于GE Fanuc 90-30系列产品线的分立式输入模块。它带有 16 个输入，这些输入排列在 1 组中，带有一个公共电源输入端子。这些输入电路是电阻/电容无抗输入。输入的一些特性是 74 至 132 伏交流电的导通状态电压、0 至 20 伏交流电的关断状态电压、6 毫安的导通状态电流、2.2 毫安的最大关断状态电流、30 毫秒的导通响应时间和 45 毫秒的关断响应时间。这些输入特性与各种用户提供的输入设备兼容，例如电子接近开关、限位开关和按钮。

IC693MDL240GAC 输入模块的额定电压为 120 伏交流电，输入电压范围为 0 至 132 伏交流电，输入电流为 12 毫安。该模块的额定频率为 50/60 赫兹，背板上 5 伏总线的额定功耗为 90 毫安。IC693MDL240交流输入模块需要交流电源。现场设备的电源必须由用户单独供电。如果电流进入输入点，它会在输入状态表中显示逻辑 1。IC693MDL240模块的现场侧和逻辑侧之间的隔离为 1500 V RMS。它可以安装在 90-30 系列可编程逻辑控制器底板的任何 I/O 插槽中。本模块不能使用直流电源。它可以扩展工厂内的 90-30 系列 I/O 系统。

Product description

The IC693MDL240G is a 120-volt AC input module of GE Fanuc. It is suitable for the 90-30 series programmable logic controllers. The module has 16 input points that share a common power input terminal. These 16 circuits are reactive inputs - they have a resistor and a capacitor. When a current enters the input point, the input status table (%I) reads logic 1. The input module can be used with a range of different input devices. For example, users can operate with limit switches or buttons and electronic proximity switches.

Technical specification

Rated voltage: 120 volts AC

# Enter: 16

Frequency: 50/60 Hz

Input current: 12 mA at rated voltage

Isolation: 1500 V RMS between the field side and the logical side

Dc power supply: No

The IC693MDL240G AC input module is a discrete input module belonging to the GE Fanuc 90-30 series product line. It comes with 16 inputs arranged in 1 group with a common power input terminal. These input circuits are resistive/capacitance-free inputs. Some of the input characteristics are the on-state voltage of 74 to 132 volts AC, the off state voltage of 0 to 20 volts AC, the on-state current of 6 MA, the maximum off state current of 2.2 MA, the on-state response time of 30 ms, and the off response time of 45 ms. These input features are compatible with various user-supplied input devices, such as electronic proximity switches, limit switches, and buttons.

The IC693MDL240GAC input module has a rated voltage of 120 volts AC, input voltage range of 0 to 132 volts AC, and input current of 12 MA. The module is rated at 50/60 Hz and the 5-volt bus on the backplane is rated at 90 mA. The IC693MDL240 AC input module requires AC power. The power supply for the field device must be supplied by the user alone. If the current enters the input point, it displays logic 1 in the input status table. The isolation between the field side and logical side of the IC693MDL240 module is 1500 V RMS. It can be installed in any I/O slot on the baseboard of the 90-30 series programmable logic controller. This module cannot use DC power supply. It can extend the 90-30 series I/O systems in the factory.