IC697BEM731Z是GE Fanuc为90-70系列制造的总线控制器模块(BCM)。 IC697BEM731 专为 Genius I/O 手持式显示器 IC660/IC661 设计。 这 IC697BEM731Z模块可作为单通道控制器使用,因此它只占用一个手持式显示器(IC66*)PLC插槽。该 BCM 异步扫描 IC66* 输入/输出模块;因此,每次扫描时,I/O 数据都会通过 IC697 PLC 机架的背板传输到 CPU 一次。IC697BEM731Z BCM 还负责支持源自 PLC CPU 通信服务请求的定向通信。此外,它可以配置为执行全局通信。 只能通过MS DOS或Windows编程软件配置功能进行配置。
型号:IC697BEM731Z
IC697BEM731Z是GE Fanuc为90-70系列制造的总线控制器模块(BCM)。 IC697BEM731 专为 Genius I/O 手持式显示器 IC660/IC661 设计。 这 IC697BEM731Z模块可作为单通道控制器使用,因此它只占用一个手持式显示器(IC66*)PLC插槽。该 BCM 异步扫描 IC66* 输入/输出模块;因此,每次扫描时,I/O 数据都会通过 IC697 PLC 机架的背板传输到 CPU 一次。IC697BEM731Z BCM 还负责支持源自 PLC CPU 通信服务请求的定向通信。此外,它可以配置为执行全局通信。 只能通过MS DOS或Windows编程软件配置功能进行配置。
该IC697BEM731Z的其他功能 包括每通道 30 个掉线、IC66* 或 IC661 I/O 诊断、支持冗余块、电缆和 CPU、LAN 通信、CPU 软配置和报警处理器功能。 安装前,请参阅适用的 PLC 安装手册。启动前应关闭电源。按照说明安装机架,然后打开电源。如果操作正确,模块将通电并显示相应的闪烁 LED。当从 CPU 接收到配置并验证总线操作时,中间 LED 将发出 ON。底部的 LED 始终熄灭。
技术规格
模块类型:Genius 总线控制器
有效数据速率:不适用
不。频道数:1
每通道跌落次数:30
串口:1(手持式显示器端口)
电流要求:1.3 安培
Model: IC697BEM731Z
The IC697BEM731Z is a Bus controller module (BCM) manufactured by GE Fanuc for the 90-70 series. The IC697BEM731 is designed for the Genius I/O handheld display IC660/IC661. This IC697BEM731Z module can be used as a single channel controller, so it occupies only one handheld display (IC66*) PLC slot. The BCM asynchronously scans IC66* input/output modules; Therefore, for each scan, I/O data is transmitted to the CPU once via the backplane of the IC697 PLC rack. The IC697BEM731Z BCM is also responsible for supporting directed communication from PLC CPU communication service requests. In addition, it can be configured to perform global communication. It can only be configured through the MS DOS or Windows programming software configuration feature.
Additional features of the IC697BEM731Z include 30 dropped calls per channel, IC66* or IC661 I/O diagnostics, support for redundant blocks, cable and CPU, LAN communication, CPU soft configuration, and alarm processor capabilities. Please refer to the applicable PLC installation manual before installation. Power should be turned off before starting. Follow the instructions to install the rack, then turn on the power. If done correctly, the module will be powered on and display the corresponding blinking LED. When the configuration is received from the CPU and the bus operation is verified, the intermediate LED will emit ON. The LED at the bottom is always off.
Technical specification
Module type: Genius Bus controller
Effective data rate: Not applicable
Nooooo. Number of channels: 1
Drops per channel: 30
Serial port: 1 (handheld display port)
Current requirement: 1.3 amps
Copyright © 2022-2024 厦门雄霸电子商务有限公司 版权所有 备案号:闽ICP备14012685号-33