IC694MDL632 离散输入 可用于任何Rx3i I/O插槽

一部分NumberIC694MDL632

输入计数，类型和速度;Pos /否定逻辑;7mS开/7mS关

电源电压和开关电压125vdc;射程110 ~ 150 v直流;> 90

背板电流消耗40ma @ 5VDC

普通位置sul 508，相当于CSA C22.2 No 142M1987标准

批准和标准危险场所I类，2类，A, B, C, D组

安装形式:面板/DIN导轨

IC694MDL632是GE发那科为PACSystems RX3i系列plc设计的离散输入，125伏直流，正/负，8点模块。它有8个输入，分为两组，每组4个点。每个组都可以配置为正逻辑或负逻辑。每个组都有一个单独的公共，它们在模块内不连接。同时接通的最大输入数取决于环境温度。

输入点的电流导致输入状态表(%I)中的逻辑1。该模块的输入特性与许多输入设备(例如，按钮，限位开关和电子接近开关)完全兼容。操作现场设备需要用户提供的电源。IC694MDL632配有绿色led(8)，指示点1-8的开/关状态。标签上的红色带用于警告用户高压。该模块可用于任何Rx3i I/O插槽。背板上5V总线的功耗为40mA，用户输入电源的功耗为36mA，所有输入均为on。

技术规格

额定电压:直流125伏

输入数量:8(2组，每组4个)

频率:n / A

输入电流:4.5 mA

输入电压范围:0 ~ +150VDC

功耗:5V总线40ma，用户电源36ma

IC694MDL632 离散输入 可用于任何Rx3i I/O插槽

Part NumberIC694MDL632

Input Count, Type & Speed8 Point;    Pos/Neg Logic;    7mS On/7mS Off

Supply Voltage and On/Off Voltage125VDC;    Range 110~150VDC;    On >90

Backplane Current Consumption40mA @ 5VDC

Approvals & Standards Ordinary LocationsUL 508, equivalent to CSA C22.2 No 142M1987 standard

Approvals & Standards Hazardous LocationsClass I, Div. 2, Groups A, B, C, D

Mounting FormatOn Panel/DIN Rail

The IC694MDL632 is a Discrete Input, 125 Volt DC, Positive/Negative, 8- Point Module by GE Fanuc for the PACSystems RX3i series PLCs.   It has 8 inputs divided in two groups of four points.   Each of those groups can be configured for either positive or negative logic.   Each group has a separate common, which are not connected inside the module.   The maximum number of inputs on simultaneously is dependent on ambient temperature.   See manual for specifics.

IC694MDL632 Current into an input point results in a logic 1 in the input status table (%I).   The module’s input characteristics are fully compatible with a number of input devices (e.g., pushbuttons, limit switches, and electronic proximity switches).   User-supplied power is necessary to operate field devices.   The IC694MDL632 is equipped with green LEDs (8) that indicate the ON/OFF status of points 1-8.   Red bands on the label are used to warn the user of high voltage.   This module can be used in any Rx3i I/O slot.   Power consumption is 40mA from the 5V bus on the backplane and 36mA from the user input supply with all inputs ON.

Technical Specifications

Rated Voltage: 125 volts DC

# of Inputs: 8 (2 groups of 4)

Freq: N/A

Input Current: 4.5 mA

Input Voltage Range:  0 to +150VDC

Power Consumption:  40 mA from 5V bus, 36 mA from user supply