IC694MDL260   输入模块 配备了32个离散输入点

GE Fanuc IC694MDL260是用于Rx3i pac系统的32点输入模块。120vac模块配备了32个离散输入点，这些输入点排列在4个隔离组中，每组8个。演示了四个输入组之间的隔离，并且组内的所有输入都引用到相同的用户公共连接。IC694MDL260模块可采用的端子排包括:盒式(IC694TBB032)、扩展盒式(IC694TBB132)、弹簧式(IC694TBS032)或扩展弹簧式(IC694TBS132)。扩展块允许增加覆盖深度，通常需要现场布线到交流设备。注:端子座需单独订购。

输入过滤时间由程序员使用指定的输出数据引用来设置。单独编号的led继电器1-32点的开/关状态。当可移动端子排固定到位时，TB红绿LED常亮。当块没有正确锁定时，它显示为红色。该模块还向RX3i CPU发送状态消息。IC694MDL260为高压模块，标签上的红色带带标识为高压模块。该模块可以安装在RX3i系统中的任何I/O插槽中。它应该与RX3i CPU(3.50版本或更高版本)一起使用，并且与系列90-30 PLC CPU不兼容。IC694MDL260的额定电压为交流120伏，输入电压范围为0 ~ 132 VAC (47 ~ 63hz)。输入滤波时间为20ms至254ms，从CPU发送的增量为20ms。在额定电压下，每个点的输入电流通常为7.0 mA。功耗为220ma, 5VDC，所有输入打开。

技术规格

额定电压:交流120伏

输入数量:32个(4个孤立组，每组8个)

频率:50/ 60hz

输入电流:7毫安，额定电压

输入电压范围:0 ~ 132 VAC

功耗:5V总线220毫安

IC694MDL260   输入模块 配备了32个离散输入点

The GE Fanuc IC694MDL260 is a 32-point Input Module for the Rx3i PACSystem.  The 120 VAC module is equipped with 32 discrete input points that are arranged in four isolated groups of eight.  Isolation is demonstrated between the four input groups, and all inputs within a group are referenced to the same user common connection.  The IC694MDL260 module can be used terminal blocks, including: box-style (IC694TBB032), extended box-style (IC694TBB132), spring-style (IC694TBS032), or extended spring-style (IC694TBS132).  Extended blocks allow added shroud depth generally necessary for field wiring to AC devices.  Note: The terminal block is ordered separately.

Input filter times are set from the programmer using assigned output data references.  Individually-numbered LEDs relay the ON/OFF status of points 1-32.  The red/green TB LED is green when the removable terminal block is safely locked in place.  It shows red when the block is not properly locked.  The module also sends a status message to the RX3i CPU.  Red bands on the label warn the user that the IC694MDL260 is a high-voltage module.  This module can be installed in any I/O slot in an RX3i system.  It should be used with an RX3i CPU (3.50 release or greater) and is not compatible with a Series 90-30 PLC CPU.  The IC694MDL260 has a rated voltage of 120 volts AC with an input voltage range of 0 to 132 VAC (or 47-63Hz).  Input filter times are 20ms to 254ms in 20ms increments sent from the CPU.  Input current is 7.0 mA per point at rated voltage typically.  Power consumption is 220 mA at 5VDC with all inputs ON.

Technical Specifications

Rated Voltage:  120 volt AC

# of Inputs: 32 (4 isolated groups of 8)

Freq: 50/60 Hz

Input Current: 7 mA at rated voltage

Input Voltage Range: 0 to 132 VAC

Power Consumption: 220 mA from 5V bus