IGP20-T22D5N-L1 FOXBORO 压力变送器

产品编号:IGP20-T22D5N-L1型

制造者:Foxboro ( by Schneider Electric )

条件:崭新

保证:12个月

基本细节:IGP20-T22D5N-L1压力变送器FOXBORO

产品描述

E69F现场安装电流到气动信号转换器接受标准直流输入信号，并将其转换为比例气动输出信号，以便与其他气动仪表或控制阀一起使用。如产品

上的“CE”标志标记所

示，本产品符合适用的欧盟指令。

结构紧凑且易于安装

IGP20-T22D5N-L1型 E69F-转换器是一种小型、设计紧凑的设备，可非常简单地连接到电气和气动接口。它可以很容易地安装在表面、阀斩或垂直管道中的标称DN50或2上。环境大气条件的影响最小E69F转换器中的振镜电机设计在线圈和外壳之间提供了较大的间隙。可能导致腐蚀和灰尘颗粒的正常大气变化不会阻碍机构的运行就像音圈型仪器有时会发生的那样。

应用多功能性

IGP20-T22D5N-L1型 输入和输出信号的选择、分离的输入范围以及正向或反向动作，使该转换器能够轻松适应各种应用。该转换器提供输出信号，特别适合用于阀门应用。

传感器防腐蚀保护：IGP20-T22D5N-L1型 可选择 316L 不锈钢、钴镍铬、镍合金 （3）、蒙乃尔合金、钽和镀金 316L 不锈钢材料。Co-Ni-Cr （TI 037-078） 的高耐腐蚀性意味着在许多困难的应用中具有较长的使用寿命，而无需为特殊材料增加成本。

宽范围：通过选择仅有的六个传感器之一，表压测量范围可低至 0.12 kPa （0.5 inH2O） 至高达 35 MPa （5000 psi），通过选择仅有的四个传感器之一，绝对压力测量范围可低至 0.87 kPa （3.5 inH2O） 至高达 21 MPa （3000 psi）。

稳定性（长期漂移）：在 5 年内每年低于 ±0.05% 的 URL。

IGP20-T22D5N-L1 FOXBORO 压力变送器

Product number :IGP20-T22D5N-L1 type

Manufacturer :Foxboro (by Schneider Electric)

Condition: New

Guarantee :12 months

Basic details :IGP20-T22D5N-L1 pressure transmitter FOXBORO

Product description

The E69F field-installed current-to-pneumatic signal converter accepts a standard DC input signal and converts it into a proportional pneumatic output signal for use with other pneumatic instruments or control valves. Such as productOn the "CE" mark marked by

This product complies with the applicable EU directives.Compact and easy to install

The IGP20-T22D5N-L1 type E69F- converter is a small, compact device that can be easily connected to electrical and pneumatic interfaces. It can be easily installed on a nominal DN50 or 2 in a surface, valve chop or vertical pipe. Ambient atmospheric condition

The galvanometer motor design in the E69F converter provides a large gap between the coil and the housing. Normal atmospheric changes that can cause corrosion and dust particles do not impede the operation of the mechanism

Like voice coil type instruments sometimes

That's what happens.

Application versatility

The selection of input and output signals of the IGP20-T22D5N-L1 type, the separate input range and the forward or reverse action enable the converter to be easily adapted to a wide range of applications. The converter provides an output signal and is particularly suitable for valve applications.

Sensor corrosion protection: IGP20-T22D5N-L1 type can choose 316L stainless steel, cobalt-Nichrome, nickel alloy (3), Monel, tantalum and gold plated 316L stainless steel material. The high corrosion resistance of Co-Ni-Cr (TI 037-078) means a long service life in many difficult applications without the added cost of special materials.

Wide range: Gauge pressure measurement ranges from as low as 0.12 kPa (0.5 inH2O) to as high as 35 MPa (5000 psi) by selecting one of only six sensors, Absolute pressure measurements can range from as low as 0.87 kPa (3.5 inH2O) to as high as 21 MPa (3,000 psi).

Stability (long-term drift) : less than ±0.05% of urls per year over 5 years.