GE ACC-5595-208 350-805595-208N 适用于GE智能平台5565反光存储器网络

Features

• For use with GE Intelligent Platforms 5565Reflective Memory network of products

• Provides up to eight ports using small formfactor pluggable (SFP) transceivers

• Hub assemblies can be cascaded with amaximum of 256 nodes

• Automatically bypasses defective or disconnected nodes in a fiber-optic network • Automatic bypass can be optionallycontrolled by the loss of signal or by theloss of sync pattern• Each port regenerates the serial opticalsignal, eliminating link losses and reducing jitter  • Configurable for use with cables up to10 km in length

• 10BaseT Ethernet TCP/IP port for remoteaccess and control

• RS232 port for local access and control• Optional 19 - inch 1U rack mount ordesktop enclosure

• Internal universal power supply

• Dark on Dark option turns off the board’stransmitter if the receiver does not detecta signal (available for firmware versions02.00 and later

特性

•用于GE智能平台5565反射存储器网络的产品

•使用SFP (small formfactor pluggable)收发器提供多达8个端口

•集线器组件可以级联最多256个节点

•自动绕过光纤网络中有缺陷或断开连接节点

•自动旁路可以通过信号的损失或同步模式的损失可选控制

•每个端口再生串行光信号，消除链路损耗和减少抖动

•可配置使用电缆长达10公里的长度

•10BaseT以太网TCP/IP端口用于远程访问和控制

•RS232端口用于本地访问和控制

•可选19英寸1U机架安装或桌面机箱

•内部通用电源

•暗开暗选项关闭板的发射器，如果接收器没有检测到信号(适用于固件版本02.00及以后)

The ACC-5595 is a managed hub designedto operate with the GE Intelligent Platforms5565 family of Reflective Memory real-timenetwork products. The Reflective Memoryhub can automatically bypass ports when

it detects a loss of signal or the loss of validsynchronization patterns, allowing the other

nodes in the network to remain operational.

Since the optical ports are implemented

with small form factor pluggable (SFP) transceivers, only the required ports need to be

populated. The ACC-5595 SFP transceivers

can be a combination of either multimode

(short distance) or single-mode (long distance) transceivers. This feature permits a

cost saving in small networks as well as system optimization. For larger networks, several

ACC-5595 assemblies can be cascaded,

permitting a managed hub array with up to

256 nodes. Each port regenerates the serial

optical signal, eliminating the problems with

insertion losses and cable attenuation. Signal

regeneration also reduces jitter. The RS232

port gives you the ability to monitor and control your Reflective Memory network through

a simple PC serial port. The Ethernet port

feature allows you to monitor and control

the hub from great distances through a local

area network (LAN) or via a Web browser.