FCP270 P0917YZ Foxboro 处理器模块 输入和输出通道

- Foxboro ( by Schneider Electric )

·产品编号:PO917Yz

产品类型: Field Control Processor 270 (FCP270)

内存大小:16 MB SDRAM 32 MB闪存

输入电压(冗余电压): 24 vdc(典型值)

·功耗(每个非容错模块):最大8.5 w

工作温度:o全+60°C(+32至+140°F)

·配置:单处理器模块。容错版本由两个处理器模块组成，基板上集成了一个互连的容错连接器。

·尺寸(长x宽x高):14.7厘米x 5.15厘米x 11.4厘米

·重量: 0.6公斤

·装运重量:1.5千克

FCP270 P0917YZ是一种控制模块，通常用于工业过程控制系统中。它具有多个输入和输出通道，用于监测过程变量、执行控制操作或执行数据采集任务。

FCP270 P0917YZ控制模块通常与连接的现场总线模块（FBM）一起执行稳压、逻辑、定时和顺序控制，执行数据采集和报警检测及通知，支持多达32个200系列FBM，带现场总线扩展模块100（FEM100）时支持多达128个200系列FBM，还支持多达64个100系列FBM。它可以通过标准光纤100 Mbps以太网连接到MESH控制网络，使用坚固的压铸铝外壳，可在G3级恶劣环境中运行，同时支持2 Mbps或268 Kbps HDLC现场总线以及FBI200或FBI100，允许连接到200系列和100系列FBM。

建议仅使用自托管功能

FCP270与200系列FBM—起使用。重新启动200系列所需的所有信息

FBM包含在FCP270。但是268k上的100系列FBM和相关产品现场总线不包括这些信息

要求工作站主机在场才能重新启动。提供了有关自托管功能的更多详细信息DIN导轨安装FBM子系统用户指南(B0400FA)。FCP270还支持以下功能:与控制器的红外通信使您能够设置和读取控制器letterbug通过letterbug配置程序功能块的报警增强功能:

在警报优先级发生变化时重新发出警报，基于可配置的时间延迟重新报警死区和基于时间可选UTC外部时间同步。

FCP270控制处理器PO917YZ福克斯波罗模块

现场控制处理器270是一种分布式、可选容错、现场安装控制器，可根据用户定义的控制策略执行过程控制和报警功能。

关于我们公司:

我们提供—流的服务我们提供多样化的零件我们实现更快的速度

秉承卓越的企业理念，我们致力于做得更好，无论是零件、服务还是交付效率。

为265个国家的5,196,226位客户提供了87,928,896个零件未根据您的搜索条件找到任何产品

如果您找不到所需的产品，请随时与我们联系。

FCP270 P0917YZ Foxboro 处理器模块 输入和输出通道

- Foxboro ( by Schneider Electric )

· Product Number :PO917Yz

Product Type: Field Control Processor 270 (FCP270)

Memory size :16 MB SDRAM 32 MB flash memory

Input voltage (redundant voltage): 24 vdc(typical)

· Power consumption (per non-fault-tolerant module): maximum 8.5w

Operating temperature :o +60°C(+32 to +140°F)

· Configuration: Single processor module. The fault-tolerant version consists of two processor modules with an interconnected fault-tolerant connector on the substrate.

· Dimensions (L x W x H): 14.7cm x 5.15cm x 11.4cm

· Weight: 0.6kg

· Shipping weight: 1.5kg

The FCP270 P0917YZ control module performs voltage regulation, logic, timing and sequence control, performs data acquisition and alarm detection and notification, typically in conjunction with the connected Fieldbus module (FBM), supports up to 32 200 series FBMS, Supports up to 128 200 series FBMS with the Fieldbus Expansion Module 100 (FEM100) and up to 64 100 series FBMS. It can be connected to MESH control networks via standard fiber 100 Mbps Ethernet, uses a robust die-cast aluminum housing, and can operate in harsh G3 environments while supporting 2 Mbps or 268 Kbps HDLC fieldbus as well as FBI200 or FBI100, allowing connectivity to 200 series and 100 series FBMS.

It is recommended to use only the self-hosting feature

The FCP270 is used with the 200 series FBM. All the information you need to restart the 200 series

FBM is included in FCP270. However, the 100 Series FBM and related product fieldbuses on the 268k do not include this information

Require the presence of the workstation host to restart. More details on the self-hosting feature are provided in the DIN Rail Mounting FBM Subsystem User Guide (B0400FA). The FCP270 also supports the following features: Infrared communication with the controller enables you to set and read the controller letterbug alarm enhancement via the letterbug configurator feature block:

Re-alert when alarm priority changes, re-alarm dead zones based on configurable time delays, and time-based optional UTC external time synchronization.

FCP270 control processor PO917YZ Foxboro module

The Field Control Processor 270 is a distributed, optional fault-tolerant, field-installed controller that performs process control and alarm functions according to user-defined control strategies.

About Us:

We offer - stream service We offer a variety of parts we achieve faster speeds

Adhering to the corporate philosophy of excellence, we are committed to doing better, whether it is parts, service or delivery efficiency.

87,928,896 parts supplied to 5,196,226 customers in 265 countries No products were found based on your search criteria

If you can't find the product you need, please feel free to contact us.