P0916DC  冗余适配器模块 用于冗余现场总线的信号连接器

型号：P0916DC   FOXBORO

P0916DC  FOXBORO集成到模块前部的发光二极管(LED)提供模块运行状态的可视指示，以及各个输入点的离散状态。

易于拆卸/更换

该模块安装在紧凑型200系列底板上，该底板采用DIN导轨安装或机架水平安装，并包括用于冗余现场总线的信号连接器、冗余独立直流电源和端接电缆。FBM上的两个螺钉将模块固定到紧凑型200系列基板上。

P0916DC   FOXBORO冗余模块必须位于基板上的相邻位置，第一个模块位于奇数编号的位置。为了实现冗余，在两个相邻的底板端接电缆连接器上放置一个冗余适配器模块，以提供单根电缆的端接。单个端接电缆从冗余适配器连接到相关的端接组件(TA)。

当冗余时，P0916DC   FOXBORO任何一个模块都可以被替换，而不会破坏到良好模块的现场输入信号。每个模块可以在不移除现场终端电缆、电源或通信电缆的情况下移除/更换。

输入电压范围(冗余 24Vdc+5%，-10%6

消耗量(最大值)  7 W

散热(最大值)   3.5 W

校准要求

无需校准模块和端接组件

法规遵从性

电磁兼容性(EMC)

欧洲EMC指令2004/108/EC(2016年4月20日之前)和2014/30/EU(2016年4月20日开始)

符合:EN61326-1:2013 A级排放和工业免疫水平

RoHS合规性

符合欧洲RoHS指令2011/65/EU。

Model: P0916DC FOXBORO

The P0916DC FOXBORO Light emitting diode (LED) integrated into the front of the module provides a visual indication of the operating status of the module, as well as the discrete status of the individual input points.

Easy to remove/replace

The module is mounted on a compact 200 Series baseboard that is DIN rail mounted or rack-mounted horizontally and includes signal connectors for redundant fieldbuses, redundant independent DC power supplies and termination cables. Two screws on the FBM secure the module to the compact 200 Series substrate.

P0916DC FOXBORO redundant modules must be located adjacent to each other on the substrate, with the first module in an odd-numbered position. To achieve redundancy, a redundant adapter module is placed on two adjacent baseboard terminating cable connectors to provide the termination of a single cable. A single termination cable is connected from the redundant adapter to the associated termination assembly (TA).

When redundant, either module of the P0916DC FOXBORO can be replaced without destroying the field input signal to the good module. Each module can be removed/replaced without removing the field terminal cable, power or communication cable.

Input voltage range (redundancy 24Vdc+5%, -10%6

Consumption (Max.) 7 W

Heat dissipation (Max.) 3.5 W

Calibration requirement

No calibration modules and termination components required

Regulatory compliance

Electromagnetic Compatibility (EMC)

European EMC Directives 2004/108/EC(before April 20, 2016) and 2014/30/EU(starting April 20, 2016)

Compliance with :EN61326-1:2013 Class A emission and industrial immunity levels

RoHS compliance

Compliance with European RoHS Directive 2011/65/EU.