EPRO  MMS6120 9100-00002C-08  控制器 具有高效、低耗等特点

产品名称:EPRO MMS6120 9100-00002C-08控制器

产品描述:EPRO MMS61209100-00002C-08控制器是一款用于工业自动化和控制系统的高性能控制器。它提供了先进的功能和可靠性，使其适用于各种应用。产品参数:

-型号:MMS61209100-00002C-08—输入电压:24V DC

—输出电压:24V DC

EPRO是印刷电子制造领域的知名企业，致力于为全球客户提供高品质、高效率、高可靠性的印刷电子制造服务。其产品广泛应用于智能包装、RFID、防伪溯源等领域，帮助客户实现数字化、智能化的生产和管理。

EPRO MMS6120 9100-00002C-08是一款由EPRO公司生产的机架电源，具有高效、低耗、环保等特点。

以上信息仅供参考，如需了解更多信息，建议查询相关产品说明书或联系EPRO公司客服。

产品细节:EMERSON MMS6120 9100-00002C-08双通道轴承振动测量模块

用于监控轴承振动的双通道轴承振动测星模块。它可以在运行过程中更换，也可以单独使用，具有冗余电源输入。扩展自检功能，内置传感器自检功能，密码保护操作级别。适用的涡流传感器PR9266/和PR9268/或压电传感器。

RS232/485端口用于现场组态和通信，并可读取测量值。内置线性化处理器。记录并存储上次启动/停止的测量数据。应用:

双通道轴承振动测星模块MMS6120使用电子速度传感器来测量轴承振动。传感器输出类型有:

VRMS均方根振动速度零峰值振动位移

Spp(峰峰值)振动位移1.信号输入

MMS6120有两路独立的电动式速度传感器信号输入—SENS 1H (z8)/SENS 1L (z10)和SENS 2H (d8)/SENS 2L (d10)。与之匹配的速度传感器为德国epro公司生产的PR926X系列电动式传感器，输入电压范围为-5...+15 V dc。

模块为每个传感器提供一个.….8mA的提升线圈电流，可补偿传感器线圈的机械沉降，此补偿电流在组态中可选: SENS 1+(z6)/SENS 1- (b6)和SENS 2+ (d6)/SENS 2- (b8)。

传感器信号可以在模块前面板上SMB接口处测到。

此外模块还备有键相信号输入(必须大于13V)，该信号是速度控制方式及频谱分析所必需的。

EPRO  MMS6120 9100-00002C-08  控制器 具有高效、低耗等特点

Product name :EPRO MMS6120 9100-00002C-08 controller

Product Description :EPRO MMS61209100-00002C-08 controller is a high performance controller for industrial automation and control systems. It offers advanced features and reliability that make it suitable for a variety of applications. Product parameters:

- Model :MMS61209100-00002C-08 - Input voltage :24V DC

- Output voltage :24V DC

EPRO is a well-known company in the field of printed electronics manufacturing, committed to providing high-quality, efficient and reliable printed electronics manufacturing services to customers around the world. Its products are widely used in intelligent packaging, RFID, anti-counterfeiting traceability and other fields to help customers achieve digital, intelligent production and management.

EPRO MMS6120 9100-00002C-08 is a rack power supply produced by EPRO, which has the characteristics of high efficiency, low power consumption and environmental protection.

The above information is for reference only, if you need more information, it is recommended to consult the relevant product manual or contact EPRO customer service.

Product Details :EMERSON MMS6120 9100-00002C-08 two-channel bearing vibration measurement module

Two-channel bearing vibration star measuring module for monitoring bearing vibration. It can be replaced during operation or used alone, with redundant power inputs. Extended self-check function, built-in sensor self-check function, password protection operation level. Applicable eddy current sensors PR9266/ and PR9268/ or piezoelectric sensors.

The RS232/485 port is used for field configuration and communication, and can read the measured values. Built-in linearization processor. Record and store measurement data that was last started/stopped. Applications:

The two-channel bearing vibration star module MMS6120 uses an electronic speed sensor to measure bearing vibration. Sensor output types are:

VRMS root mean square vibration velocity Zero peak vibration displacement

Spp(peak-to-peak value) vibration displacement 1.Signal input

The MMS6120 has two independent electric speed sensor inputs - SENS 1H (z8)/SENS 1L (z10) and SENS 2H (d8)/SENS 2L (d10). The matching speed sensor is the PR926X series electrodynamic sensor produced by epro, Germany, with an input voltage range of -5... +15 V dc.

Modules provide one for each sensor.... The.8mA lifting coil current compensates for mechanical settlement of the sensor coil, which is available in configurations SENS 1+(z6)/SENS 1- (b6) and SENS 2+ (d6)/SENS 2- (b8).

Sensor signals can be detected at the SMB interface on the front panel of the module.

In addition, the module also has a key signal input (must be greater than 13V), which is necessary for speed control mode and spectrum analysis.