EMERSON A6210  地震振动监测器

【功能描述】

所需信号输出类型(振动或位置)的发射机的配置

测量范围是通过跨接设置。

为达到较高的测量精度，将发射机中的沪深9360调整为选

传感器类型和电缆长度(5- 与6422米或9米电缆或5与6423米或9米

电缆)。一 起，A6210发射器和传感器组成的测量链。改变

传感器类型和/或传感器的电缆长度需要重新校准的发射机保持

准确度。

该测量链的特性是适用于参考材料4铬钼42,

根据SAE 4140。

在安装过程中，A6210调整传感器头和传感器之间的距离

测量目标。传感器调整的标准是缓冲输出信号

发射机。

沪深9360变送器是在一个封闭的内置弹簧DIN轨夹坚固的外壳。-个

可选面板适配器可用。连接电涡流传感器与- -一个可插拔的柠檬

在发射机前面的连接器。电流环的额定电源电压

电动变送器直流24 Vzui大5009分流。测量值缩放

4-20mA输出。

EMERSON A6210  地震振动监测器

The configuration of the transmitter for the desired signal output type (vibration or position)

The measuring range is set through a jumper.

In order to achieve higher measurement accuracy, the Hushen 9360 in the transmitter is adjusted to select

Sensor type and cable length (5- with 6422 m or 9 m cable or 5 with 6423 m or 9 m cable

Cable). One, the A6210 transmitter and sensor consists of a measurement chain. transform

The sensor type and/or cable length of the sensor needs to be recalibrated by the transmitter

Accuracy.

The characteristics of the measurement chain are suitable for reference material 4 chromium molybdenum 42,

According to SAE 4140.

During installation, the A6210 adjusts the distance between the sensor head and the sensor

Measure the target. The standard of sensor adjustment is to buffer the output signal

The transmitter.

The Husen 9360 transmitter is in a sturdy housing with a closed built-in spring DIN rail clamp. -

Optional panel adapters are available. Connect the eddy current sensor to a pluggable lemon

Connector in front of transmitter. Rated power supply voltage of the current ring

Electric transmitter DC 24 Vzui large 5009 shunt. Scaling of measurement

4-20mA output.

【联系我们】

厦门雄霸电子商务有限公司

厦门市思明区吕岭路1733号创想中心2009-2010单元

联系人：珊妮

电话：18059884797