5X00846G01|  串口通信模块 |5X00481G01 | 1C31194G01

型号：5X00846G01

类别： 串口通信模块

货期：3-5天/周

发货方式：顺丰/联邦

付款方式：电汇/西联

成色：全新/二手

质保：一年

5X00846G01 串口通信模块是一种用于实现设备间串行数据通信的硬件或软件模块。以下是关于串口通信模块的详细解释：

定义与功能：

5X00846G01 串口通信模块是一种嵌入式系统中的组件，负责在计算机与外部设备（如传感器、微控制器、打印机等）之间通过串行接口进行数据传输。

它通过发送和接收数据来实现设备之间的数据交换。

组成部分：

串口收发器：负责将串行数据转换为并行数据（UART协议），或将并行数据转换为串行数据。

波特率发生器：5X00846G01 控制数据传输速率的关键模块，根据预设的波特率值生成时钟信号。

缓冲区：用于存储待发送或接收的数据，提高通信效率。

控制逻辑：控制串口通信的各个环节，如数据的发送和接收、缓冲区的管理等。

工作原理：

数据以字节为单位进行传输，每个字节包含起始位、数据位、校验位和停止位。

串口通信采用异步通信方式，发送方和接收方的时钟信号不同步。

传输的数据格式、波特率、校验方式等参数需要通信双方预先设置并匹配。

5X00846G01| Serial communication module |5X00481G01 | 1C31194G01

Model: 5X00846G01

Category: Controller module

Delivery time: 3-5 days/week

Delivery method: SF Express/Federal

Payment method: Wire transfer/Western Union

Finish: Brand new/used

Warranty: One year

The 5X00846G01 Serial communication module is a hardware or software module used to realize serial data communication between devices. The following is a detailed explanation of the serial communication module:

Definition and functions:

The 5X00846G01 Serial communication module is a component in an embedded system that is responsible for data transmission between a computer and external devices (such as sensors, microcontrollers, printers, etc.) via a serial interface.

It enables data exchange between devices by sending and receiving data.

Components:

Serial transceiver: Responsible for converting serial data to parallel data (UART protocol), or parallel data to serial data.

Baud rate generator: 5X00846G01 A key module that controls the data transfer rate and generates a clock signal based on a preset baud rate value.

Buffer: Used to store data to be sent or received, improving communication efficiency.

Control logic: 5X00846G01 controls all aspects of serial communication, such as data sending and receiving, buffer management, etc.

How it works:

Data is transmitted in bytes, and each byte contains a start bit, a data bit, a check bit, and a stop bit.

Serial communication adopts asynchronous communication mode, the clock signal of the sender and the receiver is not synchronized.

Parameters such as data format, baud rate, and verification mode need to be preset and matched by the communication parties.