IS200TREGH1BDB  跳闸紧急终止板 用于监控和控制电力系统的运行

产品描述

IS200TREGH1BDB跳闸紧急终止板是一种用于Mark VI系列的印刷电路板或PCB，由通用电气（General Electric）或通用电气（GE）创建。Mark VI是通用电气Mark系列的最新系列，专为蒸汽轮机和燃气轮机的运行和自动化而设计。

IS200TREGH1BDB跳闸紧急终止板上的组件包括一系列正方形的变压器，这些变压器由透明塑料和银线覆盖，并包含有关组件的信息，如部件号和电压。这些变压器中有十二个位于两条垂直线上，每条垂直线有六个变压器。此外，还有两个大型黑色接线端子占据了板的左边缘空间，共有四十八个端子，平均分配在两个接线端子之间。板上还包含许多称为金属氧化物压敏电阻或MOV的组件，这些MOV是圆形和纯红色的，被放置在板的边缘。最后，板的顶部边缘放置了三个白色跳线端口，这些端口之间总共有十七个端口。

总的来说，IS200TREGH1BDB跳闸紧急终止板是一种在蒸汽轮机和燃气轮机中使用的重要组件，用于监控和控制电力系统的运行，并在必要时采取紧急措施以保护设备和人员安全。

矩形IS200TREGH1BDB印刷电路板在其左边界上具有两(2)个长实色黑色端子块。每一个接线柱里面都有24个银金属端子。一系列大约十(10)个圆形的红色元件，称为MOVs或金属氧化物压敏电阻，排列在这些端子块的右侧。IS200TREGH1BDB中间的大部分空间由集热器或大型继电器或接触器占用。这些继电器/接触器被安排成两(2)条每(6)个元件的长线。组件成对放置，从上到下彼此平行。沿着IS200TREGH1BDB的右边界是一组三(3)插孔连接器端口。每个端口包含一个小引脚端口的集合。在IS200TREGH1BDB右侧的两(2)个不同区域可以找到四个矩形形状的大电容器。这四(4)个组件是纯黄色的。两个(2)在右上角附近配对，另外两个(2)在右下角的角落配对。

IS200TREGH1BDB  跳闸紧急终止板 用于监控和控制电力系统的运行

Product description

The IS200TREGH1BDB Trip Emergency Termination Board is a printed circuit board or PCB for the Mark VI series, created by General Electric or GE. The Mark VI is the latest in the GE Mark series, designed for the operation and automation of steam and gas turbines.

The components on the IS200TREGH1BDB trip emergency termination board consist of a series of square transformers that are covered by clear plastic and silver wires and contain information about the components, such as part number and voltage. Twelve of these transformers are located on two vertical lines, each of which has six transformers. In addition, there are two large black terminals that occupy the space on the left edge of the board, a total of 48 terminals, evenly divided between the two terminals. The board also contains a number of components called metal oxide varistors or MOV, which are round and solid red and are placed on the edge of the board. Finally, three white jumper ports are placed on the top edge of the board, for a total of seventeen ports between these ports.

Overall, the IS200TREGH1BDB trip Emergency stop board is an important component used in steam turbines and gas turbines to monitor and control the operation of the power system and take emergency measures if necessary to protect equipment and personnel.

The rectangular IS200TREGH1BDB printed circuit board has two (2) long solid black terminal blocks on its left border. Inside each post are 24 silver metal terminals. A series of approximately ten (10) round red elements, called MOVs or metal oxide varistors, are arranged on the right side of these terminal blocks. Most of the space in the middle of the IS200TREGH1BDB is occupied by collectors or large relays or contactors. These relays/contactors are arranged into two (2) long wires of each (6) element. Components are placed in pairs, parallel to each other from top to bottom. Along the right border of the IS200TREGH1BDB is a set of three (3) jack connector ports. Each port contains a collection of small pin ports. Four large capacitors of rectangular shape can be found in two (2) different regions to the right of the IS200TREGH1BDB. These four (4) components are pure yellow. Two (2) are paired near the top right corner and the other two (2) are paired in the bottom right corner.