SONIX AL8XGTE1S 8055003  可编程控制 

【功能描述】

SONIX AL8XGTE1S 8055003适用于Advant Master DCS的Advant Controller 160支持和迁移适用于Advant Master DCS的ABB Advant Controller 160，这是一个经过验证的燃气轮机、蒸汽轮机和水轮机涡轮机控制和保护系统。Advant Controller 160的广泛参考案例包括由Alstom和前ABB Stal（现为Siemens Industrial Turbomachinery）交付的联合循环发电站。Advant Controller 160提供强大的功能：逻辑和顺序控制监管控制定位计算和过程优化报警和事件记录通过串行线路（如Modbus、SERCOS和Siemens 3964R）与其他系统的开放接口应用程序和工程访问的密码保护可扩展冗余Advant Controller 160提供多种功能，例如：由于准确的源头事件时间标记，支持事件序列。冗余：处理器模块、I/O总线扩展、Advant现场总线100和电源。完全集成在系统800xA中。最多6个处理器模块的多处理。范围广泛的中央S600和分布式S800 I/O模块提供了最大的配置可能性。建议的最大容量约为1500个I/O点。

SONIX AL8XGTE1S 8055003精简的设备状态指示器–为NAMUR NE107诊断提供新的命令和标准化支持，以清晰简单的方式通知操作员设备状态–故障、超出规格、功能检查或需要维护。

SONIX AL8XGTE1S 8055003关键性能指标(KPI支持NAMUR NE124的附加标准化命令，用于主机访问WirelessHART网络性能指标，包括网络健康和可靠性数据。。

SONIX AL8XGTE1S 8055003HART Over Internet Protocol–规定并标准化远程I/O系统、多路复用器、网关和主机系统之间的协议。

SONIX AL8XGTE1S 8055003分立功能-新命令增强了对多种分立和“开/关”型诊断设备的支持。

SONIX AL8XGTE1S 8055003红外设备访问–用于设备配置和维护的新无线接口选项，无需在危险区域打开设备外壳。

SONIX AL8XGTE1S 8055003  可编程控制 

SONIX AL8XGTE1S 8055003 Advant Controller 160 for Advant Master DCS Support and migration ABB Advant Controller 160 for Advant Master DCS, It is a proven turbine control and protection system for gas, steam and water turbines. Extensive reference cases for the Advant Controller 160 include combined cycle power stations delivered by Alstom and the former ABB Stal (now Siemens Industrial Turbomachinery). The Advant Controller 160 provides powerful features: Logical and sequential control Regulatory control Positioning calculation and process optimization Alarm and event logging via serial lines (such as Modbus, SERCOS and Siemens 3964R) Open interface with other systems applications and password protection for engineering access Scalable redundancy Advant Controller 160 provides a wide range of features, For example, event sequences are supported due to accurate source event timing. Redundancy: Processor modules, I/O bus extensions, Advant Fieldbus 100, and power supply. Fully integrated in System 800xA. Multiprocessing of up to 6 processor modules. A wide range of central S600 and distributed S800 I/O modules offer maximum configuration possibilities. The recommended maximum capacity is approximately 1500 I/O points.

SONIX AL8XGTE1S 8055003 Streamlined device status Indicator - Provides new command and standardized support for NAMUR NE107 diagnostics, notifies operators in a clear and simple way of device status - failure, out-of-specification, functional check, or need for maintenance.

SONIX AL8XGTE1S 8055003 Key Performance Indicators (KPIs support additional standardized commands of NAMUR NE124 for hosts to access WirelessHART network performance indicators, including network health and reliability data.

SONIX AL8XGTE1S 8055003HART Over Internet Protocol - Specifies and standardizes the protocol between remote I/O systems, multiplexers, gateways, and host systems.

SONIX AL8XGTE1S 8055003 Discrete Function - New command enhances support for a variety of discrete and "on/off" diagnostic devices.

SONIX AL8XGTE1S 8055003 Infrared Device Access - A new wireless interface option for device configuration and maintenance without having to open the device housing in hazardous areas.

SONIX AL8XGTE1S 8055003  可编程控制 

【联系我们】

厦门雄霸电子商务有限公司

厦门市思明区吕岭路1733号创想中心2009-2010单元

联系人：珊妮

电话：18059884797

电子邮件：2082431634 @qq.com

QQ：2082431634

【常问问题】

1.保修怎么样？

所有产品均享有1年保修。

2.什么是交货时间？

通常1-3个工作日

3.其他供应商的价格比您好吗？

“为客户创造利益是我们的信念。如果您有更好的价格，请告诉我们。我们会尽力满足您的价格并支持您

4.发货怎么样？

我们可以安排发货以具有竞争力的价格，例如顺丰，德邦等