METSO PDP401 程序模块

METSO  PDP401  程序模块

应用

METSO  PDP401  程序模块是基于微处理器的数字控制和监控专为独立或联网电伴热设计应用。

该系统提供温度控制和加热器电缆监视，同时向操作人员，如温度警报、电压电流报警、接地故障泄漏、传感器故障和通信故障。系统组件电路管理系统安装在NEMA 4X中耐用的模制玻璃纤维聚酯外壳，可挂墙或机架安装。

系统配有双极固态加热器开关和环境硬化，可用于各种工厂位置。

标准版本可以安装在Class中1、2类危险场所，无特殊要求。多达256个单独的系统可以连接到单个RS 485数据高速公路，允许与主机设备通信。

CM-2201完全兼容基于PC的通过Modbus?RTU协议的通信软件。所有报警和控制功能均可从中心位置。

METSO  PDP401  程序模块

The METSO PDP401 program module is a microprocessor-based digital control and monitoring designed for stand-alone or networked electrical heat tracing applications.

The system provides temperature control and heater cable monitoring while providing information to operators such as temperature alarms, voltage and current alarms, ground fault leakage, sensor failures and communication failures. The circuit management system is installed in a durable moulded fiberglass polyester housing in the NEMA 4X for wall or rack mounting.

Equipped with bipolar solid state heater switches and environmental hardening, the system can be used in a variety of plant locations.

The standard version can be installed in Class 1 and Class 2 dangerous places without special requirements. Up to 256 individual systems can be connected to a single RS 485 data highway, allowing communication with host devices.

The CM-2201 is fully compatible with PC-based Modbus? RTU protocol communication software. All alarm and control functions are available from a central location.

METSO  PDP401  程序模块