3301/30-080-00-00  Bently 标准延长线 测量不同线段的位置

品牌 ： Bently Nevada

产品编号: 330130-080-00-00

产品类型 ： 3300 XL 标准延长线

美国制造

可以添加原产地证书

电缆长度选项：080 = 8.0 米（26.2 英尺）

连接器保护器和电缆选项：00 = 标准电缆

机构批准选项：00 = 不需要

装运重量 ： 3Kg

330130-080-00-00标准延长线一般是指延长线是连接电路或用电器的导线电线的辅助线路，没有电流流过。

330130-080-00-00延长线通常被用来将一个已知的图形扩大起来，这种方法通常被用于解决各种复杂的几何问题，包括定位和测量不同线段的位置、计算直线角度、以及确定多边形的内部角度。

 特点:

非常适合压缩系统、速度测量和流体薄膜轴承机器扩展温度范围应用

单元和布线的完全互换性

向后兼容其他非3300 XL系列传感器系统组件

GE / Bently Nevada 3300 XL8mm近程传感器系统由一个3300 XL 8mm探头、一根330OXL延长电缆和—个3300XL近程传感器组成。该系统提供的输出电压与探针计尖端和观察到的导电表面之间的距离成正比，可以测量静态(位置)和动态(振动)值。该系统的主要应用是流体薄膜轴承机器的振动和位置测量，以及键相参考和速度测量。标准的3300XL 8 mm 5米系统还完全符合美国石油协会(AP)670标准(第四版)的机械配置、线性范围.精度和温度稳定性。所有3300 XL 8 mm接近传感器系统都提供了这种水平的性能，并支持探头、延长电统和Proximitor传感器的完全互换性，无需儿配或基准校准单个组件。

延长线有以下用处：

330130-080-00-00延长线可以扩大一个已知的图形，用来引出新的角度和边界。

延长线通常被用来将一个已知的图形扩大起来，这种方法通常被用于解决各种复杂的几何问题，包括定位和测量不同线段的位置、计算直线角度、以及确定多边形的内部角度。

延长线是一种单独的电线或电缆，用于连接设备和电源或信号源，它的作用是在一个距离较远的位置提供电源或信号，以满足设备的要求。

3301/30-080-00-00  Bently 标准延长线 测量不同线段的位置

Brand: Bently Nevada

Product Number: 330130-080-00-00

Product type: 3300 XL standard extension cable

Made in the USA

Certificates of origin can be added

Cable Length options: 080 = 8.0 m (26.2 ft)

Connector protector and cable options: 00 = Standard cable

Agency approval option: 00 = Not required

Shipping weight: 3Kg

330130-080-00-00 standard extension wire generally refers to the extension wire is connected to the circuit or electrical wire auxiliary line, no current flow.

330130-080-00-00 Extension lines are often used to enlarge a known figure, and this method is often used to solve a variety of complex geometric problems, including locating and measuring the position of different line segments, calculating the Angle of a line, and determining the internal Angle of a polygon.

Features:

Ideal for compression systems, velocity measurement and extended temperature range applications for fluid film bearing machines

Full interchangeability of cells and wiring

Backward compatible with other non-3300 XL series sensor system components

The GE/Bently Nevada 3300 XL8mm short-range sensor system consists of a 3300XL 8mm probe, a 330OXL extension cable, and a 3300XL short-range sensor. The output voltage provided by the system is proportional to the distance between the tip of the probe meter and the observed conductive surface, and both static (position) and dynamic (vibration) values can be measured. The main applications of this system are vibration and position measurement of fluid film bearing machines, as well as key phase reference and velocity measurement. The standard 3300XL 8 mm 5 meter system is also fully compliant with the mechanical configuration and linear range of the American Petroleum Institute (AP)670 standard (4th Edition). Accuracy and temperature stability. All 3300 XL 8 mm proximity sensor systems provide this level of performance and support full interchangeability of the probe, extension battery and Proximitor sensors, with no need for matching or reference calibration of individual components.

The extension cord has the following uses:

The 330130-080-00-00 extension cord can enlarge a known figure and be used to introduce new angles and boundaries.

Extension lines are often used to enlarge a known figure, and this method is often used to solve a variety of complex geometric problems, including locating and measuring the position of different line segments, calculating the Angle of a line, and determining the internal Angle of a polygon.

An extension cord is a separate wire or cable used to connect a device to a power or signal source, and its role is to provide power or signal at a distant location to meet the requirements of the device.