3301/05-02-12-05-02-05  Bently  接近探头传感器 同轴连接器

3301/05-02-12-05-02-05  Bently  接近探头传感器 同轴连接器

3301/05-02-12-05-02-05  Bently  接近探头传感器 同轴连接器

品牌 ： Bently Nevada

产品编号: 330105-02-12-05-02-05

产品类型 ： 3300 XL 8mm5.  3300 系列5mm 探头（参见部件号为141605-01的技术规格和订货信息）物理尺寸更小，但与8mm 探头相比，不允许削减侧视间距或端部到端部的空间尺寸。当由于受物理条件约束（不是电约束）而无法使用8mm 探头时，30105-02-12-05-02-05则用5mm探头代替。当侧视距离较窄时，可使用3300NSv 电涡流传感器系统（参见部件号为147385-01 的技术规格和订货信息）。

 8mm 探头的线圈被更厚地封装到注塑PPS 塑料探头端部，所以探头更结实。探头体也因为直径更大而更加牢固。我们建议在可能的情况下尽量采用8mm 探头，以避免机械损坏。

对于每一根3300XL 延伸电缆，也可以选择硅树脂胶带来代替接头保护器，但在探头与延伸电缆的连接暴露在机组油液中的情况下，不推荐使用硅树脂胶带。

技术规格 

在没有另外注明时，以下关于3300 XL8 mm前置器、延伸电缆和探头的技术规格是在下

列条件下得到的：温度+18°C～+27°C（+64°F～+80°F°），－24Vdc 电源供电，

10KΩ负载，AISI4140 钢被测靶面，30105-02-12-05-02-05探头间隙为1.27mm (50mils)。 技术特性适用于完全由3300 XL 8mm 部件组成的系统。其精度和可互换性指标不适用于未经本特利内华达AISI 4140 钢靶面校准的传感器系统。 

美国制造

可以添加原产地证书（COO）

总长度选项：0 5 - 0.5 米（1.6 英尺）

连接器选项 ： 0 2 - 微型 ClickLoc 同轴连接器

机构批准 ： 0 5 - 多重批准

装运重量 ： 1.5 公斤

5.  3300 系列5mm 探头30105-02-12-05-02-05（参见部件号为141605-01的技术规格和订货信息）物理尺寸更小，但与8mm 探头相比，不允许削减侧视间距或端部到端部的空间尺寸。当由于受物理条件约束（不是电约束）而无法使用8mm 探头时，则用5mm探头代替。当侧视距离较窄时，可使用3300NSv 电涡流传感器系（参见部件号为147385-01 的技术规格和订货信息）。

8mm 探头的线圈被更厚地封装到注塑PPS 塑料探头端部，30105-02-12-05-02-05所以探头更结实。探头体也因为直径更大而更加牢固。我们建议在可能的情况下尽量采用 对于每一根3300XL 延伸电缆，也可以选择硅树脂胶带来代替接头保护器，但在探头与延伸电缆的连接暴露在机组油液中的情况下，不推荐使用硅树脂胶带。

技术规格 

在没有另外注明时，以下关于3300 XL8 mm前置器、延伸电缆和探头的技术规格是在下

列条件下得到的：温度+18°C～+27°C（+64°F～+80°F°），－24Vdc 电源供电，10KΩ负载，AISI4140 钢被测靶面，探头间隙为1.27mm (50mils)。 技术特性适用于完全由3300 XL 8mm 部件组成的系统。其精度和可互换性指标不适用于未经本特利内华达AISI 4140 钢靶面校准的传感器系统。 

  3301/05-02-12-05-02-05  Bently  接近探头传感器 同轴连接器

Brand: Bently Nevada

Product Number: 330105-02-12-05-02-05

Product Type: 3300 XL 8mm5.3300 Series 5mm probes (see technical specifications and ordering information for Part number 141605-01) are physically smaller, but do not allow for reductions in side view spacing or end to end space dimensions compared to 8mm probes. When the 8mm probe cannot be used due to physical constraints (not electrical constraints), the 30105-02-12-05-05-05 is replaced by a 5mm probe. When the side view distance is narrow, the 3300NSv eddy current sensor system can be used (see technical specifications and ordering information for Part number 147385-01).

The 8mm probe coil is more thickly packaged into the injection molded PPS probe end, so the probe is stronger. The probe body is also more robust due to its larger diameter. We recommend using 8mm probes where possible to avoid mechanical damage.

For each 3300XL extension cable, silicone tape can also be selected to replace the connector protector, but it is not recommended in cases where the connection between the probe and the extension cable is exposed to the unit oil.

Technical specification

Technical specifications for 3300 XL8 mm precursors, extension cables, and probes are provided below unless otherwise indicated

Under column conditions: temperature +18°C ~ +27°C (+64°F ~ +80°F°), -24Vdc power supply,

10KΩ load, AISI4140 steel target surface, 30105-02-12-05-02-05 probe clearance of 1.27mm (50mils). Technical characteristics suitable for systems consisting entirely of 3300 XL 8mm components. Its accuracy and interchangeability indicators do not apply to sensor systems that are not calibrated with Bentley Nevada AISI 4140 steel target surfaces.

Made in the USA

Certificate of Origin (COO) can be added

Total Length options: 0 5-0.5 m (1.6 ft)

Connector options: 0 2 - Miniature ClickLoc coaxial connector

Agency Approval: 0 5 - Multiple approvals

Shipping weight: 1.5 kg

5. The 3300 series 5mm probe 30105-02-12-05-02-05 (see technical specifications and order information for Part number 141605-01) is physically smaller, but does not allow for a reduction in side view spacing or end to end space size compared to 8mm probes. When an 8mm probe cannot be used due to physical constraints (not electrical constraints), a 5mm probe is used instead. When the side view distance is narrow, the 3300NSv eddy current sensor system can be used (see technical specifications and ordering information for Part number 147385-01).

The 8mm probe coil is more thickly packaged into the injection molded PPS probe end, 30105-02-12-05-02-05 so the probe is stronger. The probe body is also more robust due to its larger diameter. We recommend using silicone tape in place of the connector protector for each 3300XL extension cable where possible, but silicone tape is not recommended in cases where the connection between the probe and the extension cable is exposed to the unit oil.

Technical specification

Technical specifications for 3300 XL8 mm precursors, extension cables, and probes are provided below unless otherwise indicated

Under column conditions: temperature +18°C to +27°C (+64°F to +80°F), -24Vdc power supply, 10KΩ load, AISI4140 steel target surface, probe gap 1.27mm (50mils). Technical characteristics suitable for systems consisting entirely of 3300 XL 8mm components. Its accuracy and interchangeability indicators do not apply to sensor systems that are not calibrated with Bentley Nevada AISI 4140 steel target surfaces.