330104-00-03-90-02-05 Bently  接近探头 延伸电缆

330104-00-03-90-02-05 3300 XL 8 mm接近探头

品牌: Bently Nevada

型号:330104-00-03-90-02-05

附加信息:3300 XL 8 mm 接近探头预计运输尺寸尺寸

: 263× 58× 28mm重量:.4.3 kg

原产地:美国

3300 XL 探头、延伸电缆和前置器都带有防腐蚀的ClickLoc镀金铜接头。这些接头只需

用手指紧固（接头会自动“锁住”），特殊的机械锁紧装置能防止连接松动。接头在安

装或拆卸时不需要特殊的工具。3300 XL 8mm 探头和延伸电缆在订货时可选择已安装接头保护器，也可以选择在现场安装（如电缆必须布放在约束导管中）。330104-00-03-90-02-05潮湿环境中为接头，推荐在所有的安装中都选用接头保护器，提供环境保护。

大温度范围应用 

330104-00-03-90-02-05当探头引线或延伸电缆在应用中可能超过 177oC（350oF）时，可以采用大温度范围（ETR）探头和延伸电缆。大温度范围探头的探头引线和接头的温度范围可达260oC（500oF）。ETR 探头和延伸电缆与标准温度范围的探头和电缆兼容。例如，可以将ETR探头和330130 延伸电缆一起使用。ETR 系统使用标准的3300 XL 前置器。当系统中使用任何ETR组件时，整个系统的精度取决于ETR系统的精度。 

1. 330104-00-03-90-02-05 前置器从工厂供货时已经过AISI4140 钢校准。也可以按用户的要求对其它端部材料进行校准。

2.  330104-00-03-90-02-05当将该传感器系统应用于转速计或超速保护测量时，请参考本特利内华达AN085 应用注意事项。 

3.  3300 XL 8mm 组件与与非-XL3300 5mm 和8mm组件具有电互换性和物理互换性。虽然3300 XL 前置器与其前一代产品有所不同，但具有相同的4 孔安装模式与4 孔安装基座配合，并且具有同样的安装所需空间尺寸（当考虑到小允许电缆弯曲半径时）。

330104-00-03-90-02-05 Bently  接近探头 延伸电缆

330104-00-03-900-02-05 3300 XL 8 mm approach probe

Brand: Bently Nevada

Model number: 330104-00-03-900-02-05

Additional information :3300 XL 8 mm close to the expected shipping dimensions of the probe

: 263× 58× 28mm Weight:.4.3kg

Country of Origin: USA

The 3300 XL probe, extension cable and preconnector all have corrosion-resistant ClickLoc gold-plated copper fittings. These joints only need

Finger tightening (the joint automatically "locks") and special mechanical locking prevents the connection from loosening. Joint in place

No special tools are required for assembly or disassembly. The 3300 XL 8mm probe and extension cable can be ordered with an installed connector protector or installed in the field (if the cable must be placed in a restraint conduit). 330104-00-03-900-02-05 As a connector in humid environment, it is recommended to use a connector protector in all installations to provide environmental protection.

Large temperature range applications

330104-00-03-900-02-05 A large temperature range (ETR) probe and extension cable can be used when the probe lead or extension cable may exceed 177oC (350oF) in the application. Large temperature range probes have probe leads and connectors with a temperature range of up to 260oC (500oF). ETR probes and extension cables are compatible with probes and cables in standard temperature ranges. For example, an ETR probe can be used with a 330130 extension cable. The ETR system uses a standard 3300 XL preprocessor. When any ETR component is used in the system, the accuracy of the entire system depends on the accuracy of the ETR system.

1. 330104-00-03-900-02-05 preprocessor has been calibrated with AISI4140 steel when supplied from the factory. Other end materials can also be calibrated according to user requirements.

2. 330104-00-03-900-02-05 Please refer to Bentley Nevada AN085 Application Considerations when applying this sensor system to tachometer or overspeed protection measurements.

3. The 3300 XL 8mm components are electrically and physically interchangeable with non-XL3300 5mm and 8mm components. While the 3300 XL preloader is different from its predecessor, it has the same 4-hole mounting mode with the 4-hole mounting base, and has the same size of space required for installation (when considering the small allowable cable bending radius).