133300-01 BENTLY 振动传感器 结构紧凑，稳定性好

型号：133300-01

品牌：BENTLY

133300-01 BENTLY振动传感器

产品参数

。产品型号:133300-01

·工作电压:24VDC

。传感器类型:振动传感器

频率响应:10Hz -1kHz

·灵敏度:100mV/g

产品规格

外形尺寸:中18mm x 58mm

·重量:约80g

。材质:不锈钢

。电缆长度:1.5m

BENTLY133300-01是一款高精度振动传感器，可广泛应用于各种机械设备的振动监测。该产品采用不锈钢材质，结构紧凑，安装简便，具有稳定性好、精度高等特点。

一般安装螺纹为3/8-24 UNF螺纹，线性范围:2mm(80mils)。线性范围从距被测靶面约0.25mm (10mils）处开始，从0.25至2.3mm10至90mils)

(约-1至-17Vdc)。

美国bently探头传感133300-01 BENTLY本特利内华达Seismoprobe.速度传感器系统测量轴承箱、机壳或结构的绝对(相对于自由空间)振动。该两线系统由传感器、电缆和可选的速度-位移转换器组成。

Seismoprobe.系列速度传感器是两线结构，采用动线圈技术提供直接正比于传感器振动速度的电压输出。与固体速度传感器(本质上是加速度计中嵌入积分电子电路)不同，动线圈传感器对冲击或脉冲励磁的敏感性降低，是更好的应用选择。此外，由于它们不要求外部电源，所以使便携式测量应用更加方便。

133300-01内部安全栅输入/输出模块要求连接每个传感器分别连接到安全栅输入/输出模块。此模块提供两个通道传感器的本质安全信号调节，内部有一个安装冷嘲热讽屏障模块。需要3500接地模块使用内部安全栅输入/输出模块提供本质安全的系统本质安全应用的接地连接。参考机架使用时系统要求的安装和维护手册内部安全栅输入/输出模块。

133300-01 BENTLY 振动传感器 结构紧凑，稳定性好

Model: 133300-01

Brand: BENTLY

133300-01 BENTLY vibration sensor

Product parameter

. Product Model :133300-01

· Working voltage :24VDC

. Sensor type: Vibration sensor

Frequency response: 10Hz-1kHz

· Sensitivity :100mV/g

Product specification

Overall dimensions: medium 18mm x 58mm

· Weight: about 80g

. Material: Stainless steel

. Cable length :1.5m

BENTLY133300-01 is a high-precision vibration sensor that can be widely used in vibration monitoring of various mechanical equipment. The product is made of stainless steel with compact structure, easy installation, good stability and high precision.

The general mounting thread is 3/8-24 UNF thread, linear range :2mm(80mils). Linear range from approximately 0.25mm (10mils) from the target to be measured, from 0.25 to 2.3mm10 to 90mils)

(about -1 to -17Vdc).

Us bently probe sensing 133300-01 BENTLY Bentley Nevada Seismoprobe. A speed sensor system measures the absolute (relative to free space) vibration of a bearing box, housing, or structure. The two-wire system consists of sensors, cables, and an optional speed-to-displacement converter.

The Seismoprobe series speed sensor is a two-wire structure that uses moving coil technology to provide voltage output directly proportional to the vibration speed of the sensor. Unlike solid speed sensors (which are essentially integrated electronic circuits embedded in accelerometers), moving coil sensors are less sensitive to shock or pulse excitation and are a better application choice. In addition, since they do not require an external power supply, they make portable measurement applications more convenient.

133300-01 Internal safety gate input/Output modules Require connection Each sensor is separately connected to the safety gate input/output module. This module provides intrinsically safe signal conditioning for two channel sensors, with an internal mounted cynicism barrier module. The required 3500 ground module uses an internal safety gate input/output module to provide intrinsically safe system ground connections for intrinsically safe applications. Refer to the installation and maintenance manual for system requirements when using the rack Internal safety grid input/output module.