140471-01 BENTLY I/O模块 置器地震监测仪

BENTLY 140471-01 - I/O模块

140471-41,是由 BetyNrerdta开发的带有内部终端的I/O模块。它是350OAL2M前)置器地震监测仪的一部分。它通过定期将观察到的数据与预定的瞽报没置点进行比较以胺发苔报来保护设备。上t与维护和操作信息共享关键机器。从地震传感器和接近传感器获取数据的四通道监视器称为350/42M前置器地震监视器。当将调节信号与用户可编程警报进行比较时，它调节信号以提供振动和位置测量。

I/O模块可以分为离散、模拟和特殊模块等多种类型，这些模块都可以安装在带有多个插槽的导轨或者机架上，每个模块插人其中一个插槽。

BENTLY 140471-01I/O模块是分布式I/O系统中的必备组件，需要与合适的耦合器组合才能将现场设备或过程连接起来，实现对现场数据采集、监视和控制。系统需要使用电源模块提供24VDC系统电压和24VDC现场电压，现场总线耦合器本身包含一个电源模块。由于使用了2组独立的电源，现场电压和系统电压彼此电气隔离。在装配现场总线节点模块时，各个模块可以任意组合排列，不要求按模块类型分组。所有通道是单端输出，有一个公共接地电位。从现场总线耦合器开始，从左向右依次装配总线I/O模块，各个模块彼此相邻安装。

BENTLY 140471-01特征

四通道8ently Nlvads 350O/A2M系列前置器)地震监闪器接受来自接近传感器和地震传感器的输入，调节信号以提供各种振动和位置测星，并将调节后的信号与用户可编程的警报进行比较.

配置钦件允沦的闷每个通道进行编程火执行以下功能:日肉振动、推力位置、膨胀差、偏心率、REAM、加速度、速度、轴绝对值和圆接受区域。前置器)地震监测器的主要功能是通过连续比较监测参数与配置的瞽报设置点来驱动警报来提供机械保护。此外，这些模块还为操作和维护人员提供关键的机器信息。

BENTLY 140471-01前面板LED

OK LED:表示3500/72M处于良好的工作状态。

TX/RX LED:当3500/72M正在与3500机架中的其他模块通信时。旁路LED:此灯表示3500/72M处于旁路模式。

140471-01特性

尺寸

241.3毫米x24.4室米x99.1毫米(高x宽x深)

重量

0.20千克(0.44磅)

机架空间要求

1个全高后插槽

产品属性

(4)频道监控

接受来自接近传感器和地震传感器的输入机械保护

提供基本机器信息

140471-01 BENTLY I/O模块 置器地震监测仪

BENTLY 140471-01 -I /O module

140471-41 is a V/O module with an internal terminal developed by BetyNrerdta. It is part of the 350OAL2M front mounted seismic monitor. It protects the device by regularly comparing the observed data with a predetermined blind spot. Share critical machine information with maintenance and operation. A four-channel monitor that obtains data from the seismic sensor and proximity sensor is called a 350/42M preprocessor seismic monitor. When the regulating signal is compared to a user programmable alarm, it adjusts the signal to provide vibration and position measurements.

I/O modules can be divided into discrete, analog and special modules, which can be mounted on rails or racks with multiple slots, each of which is inserted into one slot 1.

The BENTLY 140471-01I/O module is the essential component of a distributed I/O system that requires the right combination of couplers to connect field devices or processes for the acquisition, monitoring, and control of field data. The system requires a power module to provide 24VDC system voltage and 24VDC field voltage, and the fieldbus coupler itself contains a power module. Due to the use of 2 independent power supplies, the field voltage and system voltage are electrically isolated from each other. When assembling fieldbus node modules, each module can be arranged arbitrarily, and it is not required to be grouped according to module type. All channels are single-ended outputs with a common ground potential. Starting with the fieldbus coupler, bus I/O modules are assembled from left to right, each module installed next to each other.

Features BENTLY 140471-01

The four-channel 8ently Nlvads 350O/A2M series preprocessor accepts input from proximity sensors and seismic sensors, adjusts the signal to provide a variety of vibration and position measurements, and compares the adjusted signal with user-programmable alerts.

Each channel is programmed to perform the following functions: daily vibration, thrust position, expansion difference, eccentricity, REAM, acceleration, speed, shaft absolute value and circle acceptance area. The main function of the seismic monitor is to provide mechanical protection by continuously comparing monitoring parameters with the configured police setting points to drive alarms. In addition, these modules provide critical machine information to operations and maintenance personnel.

BENTLY 140471-01 Front panel LED

OK LED: indicates that 3500/72M is in good working condition.

TX/RX LED: When the 3500/72M is communicating with other modules in the 3500 rack. Bypass LED: This light indicates that 3500/72M is in bypass mode.

140471-01 Features

dimension

241.3mm x24.4 m x 99.1mm (H x W x D)

weight

0.20 kg (0.44 lb)

Rack space requirement

1 full height rear slot

Product attribute

(4) Channel monitoring

Accepts input mechanical protection from proximity sensors and seismic sensors

Provide basic machine information