133819-01 Bently 系统监视器摸块 监测和故障诊断

品牌:BENTLY

型号：133819-01

质保:1年

成色:全新

产品名称:系统监视器模块

产品净宽:53毫米

产品净高:125毫米

产品净深/长度:260毫米

产品净重:0.7公斤

订购

最小起订量:1件

原产地:美国

Bently 133819-01是一种系统监视器摸块，通常用于工业设备和机械系统的监测和故障诊断。这个模块是由Berntly (贝特利)公司生产的，该公司是全球知名的机城和振动监测解决方案供应商。

具体的产品应用领域取决于用户的需求和工业应用场景。以下是一些可能的应用领域:

1.机械设备监X:Benty 133819-01系统监视器模块可用于监测旋转机械设备(如发电机、涡轮机、泵、压缩机等)的振动、温度、压力和其他关键参数，以实时监控设备的运行状态。2.工业过程监测:在工业生产过程中，该模块可以用于监测和诊断生产设备和系统的运行情况，确保生产过程的稳定性和高效性。

3.能源行业:在发电厂和能源生产设施中，Bently 3389-O1系统监视器模块可用于监测发电机、涡轮机和其他关键设备的健康状态，以预防潜在故障和提高设备可靠性。4.石油和天然气:在石油和天然气行业，该模块可用于监测离心压缩机、泵站、压气机等设备，提供早期故障诊断和预防维护。

5.航空航天:在航空航天领域，Bently 133819-01系统监视器模块可能用于监测飞机和发动机的振动和健康状况，以确保安全和可靠性。

本特利133819-01运动控制器模块

前面板各硬件开关作用:

框架复位按钮:清除锁定的报警和延时正常通道(Timed OK)失败，同输入/输出模块上的“框架复位”触点有相同的功能。

地址开关:用来设置框架地址，共有63个可选地址。

组态钥匙锁:是用来设定3500 框架处于"RUN”"(“运行”）模式或"PROGRAM"(“编程”）模式。RUN模式允许框架正常操作并且锁定任何组态变化。PROGRAM模式允许框架正常运行并且允许对框架进行远程或本地组态。钥匙键可以在框架中的两个位置之间任意转还，允许开关保持在RUN 或PROGRAM位置。锁定至RUN方式可以防止任何非授权的框架组态。锁定至

PROGRAM方式可以在任何时间对框架进行远程组态。

4、3500/22瞬态数据接口

3500瞬态数据接口(TDI)是3500监测系统和本特利System 1TM 机械管理软件之间的接口。TDI结合了3500/20框架接口模块(RIM）和通讯处理器，如TDXnet的功能。TDI运行在3500框架的RIM插槽中，与M系列监测器（3500/40M、3500/42M等）配合使用，连续采集稳态和瞬态波形数据，并通过以太网将数据传送到主计算机软件。TDI具有标准的静态数据采集，但是采用可选的通道使能磁盘，也可采集瞬态或动态数据。TDI与以前的通讯处理器相比，除了将通讯处理器的功能集成到3500框架以外，还有其它几方面的改进。

TDI为全部框架提供通用功能，但并不是关键监测通道的组成部分，不影响整个监测系统的正确和常规运行。每个框架要求一个TDI或RIM。TDI只占用框架中的一个槽位，必须位于第一个插槽中(紧邻电源模块)。

133819-01 Bently 系统监视器摸块 监测和故障诊断

Brand :BENTLY

Model: 133819-01

Warranty :1 year

Finish: Brand new

Product name: System monitor module

Product width :53 mm

Product height :125 mm

Product net depth/length :260 mm

Net weight :0.7 kg

order

Minimum order quantity :1 piece

Country of Origin: USA

The Bently 133819-01 is a system monitor module commonly used for monitoring and fault diagnosis of industrial equipment and mechanical systems. The module is produced by Berntly, a world-renowned supplier of machine city and vibration monitoring solutions.

The specific product application field depends on the needs of users and industrial application scenarios. Here are some possible application areas:

1. Mechanical Equipment Monitoring X: The Benty 133819-01 System monitor module can be used to monitor the vibration, temperature, pressure and other key parameters of rotating mechanical equipment (such as generators, turbines, pumps, compressors, etc.) to monitor the operating status of the equipment in real time. 2. Industrial process monitoring: In the industrial production process, the module can be used to monitor and diagnose the operation of production equipment and systems to ensure the stability and efficiency of the production process.

3. Energy industry: In power plants and energy production facilities, the Bently 3389-O1 system monitor module can be used to monitor the health of generators, turbines and other critical equipment to prevent potential failures and improve equipment reliability. 4. Oil and Gas: In the oil and gas industry, the module can be used to monitor equipment such as centrifugal compressors, pumping stations, and compressors, providing early fault diagnosis and preventive maintenance.

5. Aerospace: In the aerospace sector, the Bently 133819-01 system monitor module may be used to monitor the vibration and health of aircraft and engines to ensure safety and reliability.

Bentley 133819-01 Motion controller module

Functions of hardware switches on the front panel:

Frame reset button: Failure to clear the locked alarm and Timed OK channels has the same function as the "Frame reset" contact on the input/output module.

Address switch: Used to set the frame address, a total of 63 optional addresses.

Configuration key lock: is used to set 3500 frame in "RUN "(" Run ") mode or "PROGRAM" mode. RUN mode allows the framework to operate normally and locks in any configuration changes. PROGRAM mode allows the framework to run properly and allows the framework to be configured remotely or locally. The key key can be rotated between two positions in the frame, allowing the switch to remain in the RUN or PROGRAM position. Locking to RUN mode prevents any unauthorized framework configurations. Lock to

The PROGRAM mode allows the framework to be configured remotely at any time.

4. 3500/22 transient data interface

The 3500 Transient Data Interface (TDI) is the interface between the 3500 monitoring System and the Bentley System 1TM machine management software. TDI combines the capabilities of 3500/20 Framework Interface Modules (RIM) and communication processors such as TDXnet. The TDI runs in the RIM slot of the 3500 frame and is used in conjunction with the M Series monitor (3500/40M, 3500/42M, etc.) to continuously collect steady-state and transient waveform data and transmit the data to the main computer software via Ethernet. TDI has standard static data acquisition, but enables the disk with an optional channel to also capture transient or dynamic data. In addition to integrating the capabilities of the communication processor into the 3500 framework, TDI has several other improvements over previous communication processors.

TDI provides common functionality to the entire framework, but is not part of the critical monitoring channel and does not affect the correct and regular operation of the overall monitoring system. Each framework requires one TDI or RIM. The TDI occupies only one slot in the frame and must be located in the first slot (next to the power module).