140471-01 Bently /3500 前置器地震监视器

部件号:140471-01 制造商:Bently Nevada  系列:3500

产品类型:Prox/Velom l/O模块，带内音部脑喘接  可用性:有货

原产地:美国(USA)

140471-01是由 Bently Nevada开发的带有内部终端的I/O模块。它是3500/42M前置器地震监测仪的一部分。它通过定期将观察到的数据与预定的警报设置点进行比较以触发警报来保护设备。lt与维护和操作信息共享关键机器。从地震传感器和接近传感器获取数据的四通道监视器称为3500/42M前置器地震监视器。当将调节信号与用户可编程警报进行比较时，它调节信号以提供振动和位置测量。

特征可加:18059884790

四通道Bently Nevada 3500/42M系列前置器/地贾监测器接受来自接近传感器和地震传感器的输入，调节信号以提供各种振动和位置测量，并将调节后的信号与用户可编程的警报进行比较。

配置软件允许您对每个通道进行编程以执行以下功能:径向振动、推力位置、膨胀差、偏心率REBAM、加速度、速度、轴绝对值和圆接受区域。前置器/地震监测器的主要功能是通过连续比较监测参数与配置的警报设置点来驱动警报来提供机械保护。此外，这些模块还为操作和维护人员提供关键的机器信息。

可以将一个或多个系统部件进行组合以满足操作需要。

从工厂的机器中取得的传感器输入信号被提供给3500监测器框架内的监测器和键相位通道。机器的数据被采集后，与报警点比较并从监测器框架送到以下一个或多个地方处理。

·连接运行3500数据采集软件的主机的框架接口模块;

·位于3500监测器框内的Gateway模块;

·位于3500监测器框架内的4通道继电器模炔;

·用于传输机械故障诊断数据的TDlx和DDlx通讯处理器。

机器数据可在以上各个地方为工厂内其他控制系统提供显示、比较或格式化数据。

前面板LED

OK LED:表示3500/72M处于良好的工作状态。

· TX/RX LED: 当3500/72M正在与3500机架中的其他模块通信时。·旁路LED:此灯表示3500/72M处于旁路模式。

140471-01特性

尺寸

241.3室米× 24.4笔米x 99.1笔米(高×宽×深)

140471-01 Bently /3500 前置器地震监视器

Part Number :140471-01 Manufacturer :Bently Nevada Series :3500

Product Type :Prox/Velom l/O module, in-band voice Brain pant Availability: In stock

Country of Origin: USA (USA)

140471-01 is an I/O module with an internal terminal developed by Bently Nevada. It is part of the 3500/42M precursor seismic monitor. It protects the device by periodically comparing the observed data to a predetermined alarm setting point to trigger an alarm. lt shares critical machines with maintenance and operational information. A four-channel monitor that gets data from the seismic sensor and proximity sensor is called a 3500/42M preprocessor seismic monitor. When the regulating signal is compared to a user programmable alarm, it adjusts the signal to provide vibration and position measurements.

The feature can be added :18059884790

The four-channel Bently Nevada 3500/42M series preprocessor/ground monitor accepts input from proximity sensors and seismic sensors, adjusts the signal to provide a variety of vibration and position measurements, and compares the adjusted signal with a user-programmable alarm.

The configuration software allows you to program each channel to perform the following functions: radial vibration, thrust position, expansion difference, eccentricity REBAM, acceleration, speed, shaft absolute value, and circle acceptance area. The primary function of the preprocessor/seismic monitor is to provide mechanical protection by continuously comparing monitoring parameters with configured alarm setting points to drive alarms. In addition, these modules provide critical machine information to operations and maintenance personnel.

One or more system components can be combined to meet operational needs.

The sensor input signal taken from the machine in the factory is fed to the monitor and key phase channel within the 3500 monitor frame. After the machine data is collected, it is compared with the alarm point and sent from the monitor frame to one or more of the following places for processing.

· Connect the frame interface module of the host running 3500 data acquisition software;

· Gateway module located in 3500 monitor frame;

· 4-channel relay module alkyne located in 3500 monitor frame;

TDlx and DDlx communication processors for transmission of mechanical fault diagnosis data.

Machine data can provide display, comparison, or formatting data for other control systems in the plant at each of these locations.

Front panel LED

OK LED: indicates that 3500/72M is in good working condition.

TX/RX LED: When the 3500/72M is communicating with other modules in the 3500 rack. · Bypass LED: This light indicates that 3500/72M is in bypass mode.

140471-01 Features

dimension

241.3 room meters x 24.4 pen meters x 99.1 pen meters (H × W × D)