3500/15127610-01  电源模块  交流电源

描述

型号：3500/15127610-01

3500 电源模块为半高模块，必须安装在机柜左侧专门设计的槽位上。3500机架可以包含一个或两个电源(交流和/或直流的组合)，任何一个电源都可以为整个机架供电。如果安装，第二个电源作为主要电源的备份。当机架内安装两个电源时，下槽位的电源作为主电源，上槽位的电源作备用电源。只要安装了备用电源，插拔任意一个电源模块都不会影响机架的正常运行。

3500电源可接受广泛的输入电压，并将其转换为其他3500模块可接受的电压。三种电源版本可与3500系列机械保护系统作为

如下:

交流电源

高压直流电源。低压直流电源

环境限制与l/o模块排序一起使用时

操作

没有内部障碍的选项:

温度:Ex nC [L] IIC: 1类，2类

-30℃至+65℃(-22℉至+150℃)

AEx nC IlC: 1级，2级

°F)。组A, B, C, D

存储T4@Ta =-20°C至+65°C

温度:-40摄氏度至+85摄氏度(-40华氏度至+185摄氏度)

(-4°F至+150°F)

°F)。

按图纸149243

湿度:95%,不结露

3500/15127610-01  电源模块  交流电源

Description

Model: 3500/15127610-01

3500 The power module is half-height and must be installed in the specially designed slot on the left side of the cabinet. The 3500 rack can contain one or two power supplies (a combination of AC and/or DC), either of which can power the entire rack. If installed, the second power supply acts as a backup to the main power supply. When two power supplies are installed in a rack, the power supply in the lower slot serves as the active power supply, and the power supply in the upper slot serves as the standby power supply. If a backup power supply is installed, the insertion or removal of any power module does not affect the normal running of the rack.

The 3500 power supply accepts a wide range of input voltages and converts them to voltages acceptable to other 3500 modules. Three power supply versions are available with the 3500 Series mechanical protection system as well

As follows:

Ac power supply

High voltage DC power supply. Low voltage DC power supply

Environmental restrictions when used with l/o module sorting

Controls

Options without internal barriers:

Temperature :Ex nC [L] IIC: Class 1, Class 2

-30 ° C to +65 ° C (-22 ° F to +150 ° C)

AEx nC IlC: Level 1, Level 2

°F). Groups A, B, C, D

Store T4@Ta =-20°C to +65°C

Temperature :-40 ° C to +85 ° C (-40 ° F to +185 ° C)

(-4°F to +150°F)

°F).

According to the drawing 149243

Humidity :95%, no condensation