330104-00-05-10-02-CN  接近探头 用于密封探头尖端和外壳之间的压差

型号: 330103 - 00 - 10 - 10 - 02 - cn

产品类型:3300 XL 8毫米接近探头

美国制造

可以添加原产地证书(COO)

非螺纹长度选项:00 = 0毫米

整体箱体长度选项:10 = 100mm

总长度选项:10 = 1.0米(3.3英尺)

连接器和电缆类型选项:02 =微型同轴ClickLocTM连接器，标准电缆

机构审批选项:CN =特定国家的审批(CN审批选项快速参考指南和现场通知信在下载部分)

探头尖端材料:聚苯硫醚(PPS)。

探头外壳材料:AISI 303或304不锈钢(SST)。

探头压力:3300 XL 8毫米探头设计用于密封探头尖端和外壳之间的压差。探头密封材料由Viton®o型圈组成。探头在装运前不进行压力测试。如果您需要为您的应用测试压力密封，

重量:0.323 Kg

运输重量:1.5 Kg

传感器的工作原理可以概括为：将输入的物理量或化学量转换为电信号输出。

具体来说，传感器通常由敏感元件、转换元件和转换电路组成。敏感元件负责感受被测量的变化，并将其转换为容易测量的物理量，例如压力传感器中的应变片。转换元件将敏感元件输出的物理量转换为电信号，例如应变片输出的电阻变化。转换电路将转换元件输出的电信号进行放大、调理等处理，以适应后续的信号处理和传输要求。

330104-00-05-10-02-CN  接近探头 用于密封探头尖端和外壳之间的压差

Model: 330103-00-10-10-02-cn

Product Type :3300 XL 8mm proximity probe

Made in the USA

Certificate of Origin (COO) can be added

Non-thread length option :00 = 0 mm

Overall box length option :10 = 100mm

Total length options :10 = 1.0 m (3.3 ft)

Connector and cable type options :02 = Miniature coaxial ClickLocTM connector, standard cable

Agency Approval options :CN = country-specific approval (Quick reference guide and on-site notification letter for CN Approval options in Download section)

Tip material: polyphenylene sulfide (PPS).

Probe housing material :AISI 303 or 304 stainless steel (SST).

Probe pressure: The 3300 XL 8mm probe is designed to seal the pressure difference between the probe tip and the housing. The probe sealing material consists of Viton® O-rings. Probes are not pressure tested prior to shipment. If you need to test pressure seals for your application, please contact our custom design department.

Weight :0.323 Kg

Shipping weight: 1.5Kg

The working principle of the sensor can be summarized as follows: convert the input physical or chemical quantity into an electrical signal output.

Specifically, the sensor is usually composed of a sensing element, a conversion element and a conversion circuit. The sensor is responsible for sensing the change being measured and converting it into a physical quantity that can be easily measured, such as a strain gauge in a pressure sensor. The conversion element converts the physical quantity of the output of the sensor into an electrical signal, such as the resistance change of the output of a strain gauge. The conversion circuit amplifies and adjusts the electrical signal output of the conversion element to adapt to the subsequent signal processing and transmission requirements.