BENTLY 125840-01 半高模块

GE / 本特利内华达3500/15系列电源是半高模块，必须安装在机架左侧专门设计的插槽中。3500 机架可以包含一个或两个电源（交流和/或直流的任意组合），任一电源都可以为整个机架供电。如果已安装，第二个电源将用作主电源的备份。当机架中安装两个电源时，下部插槽中的电源充当主电源，上部插槽中的电源充当备用电源。只要安装了第二个电源，卸下或插入任一电源模块就不会中断机架的运行。

3500 电源可接受宽范围的输入电压，并将其转换为其他 3500 模块可接受的电压。3500 系列机械保护系统提供三种电源版本，如下所示：1. 交流电源，2. 高压直流电源 3.低压直流电源。

The GE/Bentley Nevada 3500/15 series power supply is a half height module that must be installed in a specially designed slot on the left side of the rack. A 3500 rack can contain one or two power supplies (any combination of AC and/or DC), and either power supply can power the entire rack. If installed, the second power supply will be used as a backup for the main power supply. When two power supplies are installed in the rack, the power supply in the lower slot serves as the main power supply, and the power supply in the upper slot serves as the backup power supply. As long as a second power supply is installed, removing or inserting any power module will not interrupt the operation of the rack.

The 3500 power supply can accept a wide range of input voltages and convert them into voltages that other 3500 modules can accept. The 3500 series mechanical protection system offers three power supply versions, as follows: 1 AC power supply, 2. High voltage DC power supply, 3. Low voltage DC power supply.