伺服驱动器 8V1045.00-2 集成线路滤波器

物料编号：

8V1045.00-2型

描述：

使用插入式模块的模块化机械设计

集成线路滤波器

集成制动电阻

所有连接均使用插入式连接器进行

集成电子重启抑制

ACOPOS

8V1045.00-2伺服电机的工作原理是伺服主要靠脉冲来定位，当伺服电机接收到1个脉冲，就会旋转1个脉冲对应的角度，从而实现位移。

8V1045.00-2伺服电机本身具备发出脉冲的功能，所以伺服电机每旋转一个角度，都会发出对应数量的脉冲和伺服电机接受的脉冲形成了呼应，或者叫闭环，系统就会知道发了多少脉冲给伺服电机，同时又收了多少脉冲回来，就能够很精确的控制电机的转动，从而实现精确的定位，可以达到0.001mm。

，3x 400-480 V，4.4 A，2 kW，集成线路滤波器、制动电阻和电子安全重启联锁

伺服驱动器又称为 "伺服控制器"、"伺服放大器"，是用来控制伺服电机的一种控制器。

8V1045.00-2伺服驱动器属于伺服系统的一部分，主要应用于高精度的定位系统。一般是通过位置、速度和力矩三种方式对伺服电机进行控制，实现高精度的传动系统定位。

8V1045.00-2伺服驱动器的优点有：

调速范围宽。

定位精度高。

有足够的传动刚性和高的速度稳定性。

快速响应，无超调。

低速大转矩，过载能力强。

可靠性高。

发热和噪音显著降低。

8V1045.00-2伺服电机的工作原理是伺服主要靠脉冲来定位，当伺服电机接收到1个脉冲，就会旋转1个脉冲对应的角度，从而实现位移。

8V1045.00-2伺服电机本身具备发出脉冲的功能，所以伺服电机每旋转一个角度，都会发出对应数量的脉冲和伺服电机接受的脉冲形成了呼应，或者叫闭环，系统就会知道发了多少脉冲给伺服电机，同时又收了多少脉冲回来，就能够很精确的控制电机的转动，从而实现精确的定位，可以达到0.001mm。

伺服驱动器 8V1045.00-2 集成线路滤波器

Material Number:

Model 8V1045.00-2

Description:

Modular mechanical design using plug-in modules

Integrated line filter

Integrated brake resistance

All connections are made using plug-in connectors

Integrated electronic restart suppression

ACOPOS servo driver, 3x 400-480 V, 4.4A, 2 kW, integrated line filter, brake resistor and electronic safety restart interlock

Servo driver is also known as "servo controller", "servo amplifier", is used to control a controller of servo motor.

The 8V1045.00-2 servo driver is a part of the servo system and is mainly used in high-precision positioning systems. Generally, the servo motor is controlled through three ways of position, speed and torque to achieve high-precision positioning of the transmission system.

The advantages of 8V1045.00-2 servo drive are:

Wide speed range.

High positioning accuracy.

It has sufficient drive rigidity and high speed stability.

Fast response, no overshoot.

Low speed, high torque, strong overload capacity.

High reliability.

Heat and noise are significantly reduced.

The working principle of 8V1045.00-2 servo motor is that the servo mainly relies on the pulse to position, when the servo motor receives a pulse, it will rotate the corresponding Angle of a pulse, so as to achieve displacement.

8V1045.00-2 servo motor itself has the function of sending pulses, so each rotation Angle of the servo motor will send a corresponding number of pulses and the pulse accepted by the servo motor to form an echo, or called a closed loop, the system will know how many pulses are sent to the servo motor, and how many pulses are received back, it can control the rotation of the motor very accurately. Thus, accurate positioning can be achieved up to 0.001mm.