6PPT30  电源面板  串行通信端口进行数据传输

6PPT30.0702-20B 6PPT30.0702-20W HMI使用隔离的RS-232和RS-422/RS-485串行通信端口进行数据传输，并由PC使用与Microsoft Windows 8.0和8.1兼容的Connected Components Workbench Software 8.0或更高版本进行编程。它还支持拖曳 USB 2.0 主机端口，用于连接外部外围设备和 512 MB 板载闪存驱动器。

贝加莱电源面板T30 6PPT30.0702-20B和6PPT30.0702-20W 屏幕老化是指静态图像在长时间显示后在显示器上的“老化”。然而，静态图像并不是屏幕老化的唯一原因。屏幕老化也称为老化效应、图像残留、记忆效应、记忆残留或重影。基本上有 2 种类型：区域类型：

这种类型的屏幕老化由深灰色图像表示。如果长时间关闭显示器，效果将消失。

线路类型：6PPT30这种类型的屏幕老化会造成持久的损坏。

电源面板指的是电脑电源供应器和主机之间的连接面板。它有很多种类，例如AT电源、ATX电源、DIY电源等。电源面板的安装和更换比较简单，只需按照电脑型号选择相应的面板，然后按照正确的方向将其插入到电脑主板的电源插座上即可。

需要注意的是，在安装和更换电源面板时，需要先关闭电脑电源，并确保电源插座和主板之间的连接正确。同时，在安装时要注意面板上的标识和方向，避免插反或插错。

6PPT30  电源面板  串行通信端口进行数据传输

6PPT30.0702-20B 6PPT30.0702-20W HMI uses isolated RS-232 and RS-422/RS-485 serial communication ports for data transmission, It is also programmed by a PC using Connected Components Workbench Software 8.0 or later, which is compatible with Microsoft Windows 8.0 and 8.1. It also supports a drag-and-drop USB 2.0 host port for connecting external peripherals and 512 MB onboard flash drives.

B&r Power Panel T30 6PPT30.0702-20B and 6PPT30.0702-20W Screen burn-in refers to the "burn-in" of a still image on a display after a long time of display. Still images aren't the only cause of aging screens, however. Screen aging is also known as aging effect, image residue, memory effect, memory residue, or ghosting. There are basically 2 types: Area type:

This type of screen aging is represented by a dark gray image. If you turn off the monitor for a long time, the effect will disappear.

Line Type: 6PPT30 Screen aging of this type can cause lasting damage.

The power panel refers to the connection panel between the computer power supply and the host computer. It has many kinds, such as AT power supply, ATX power supply, DIY power supply and so on. The installation and replacement of the power panel is relatively simple, just select the corresponding panel according to the computer model, and then insert it into the power socket of the computer motherboard in the correct direction.

It should be noted that when installing and replacing the power panel, you need to turn off the computer power first and ensure that the connection between the power socket and the motherboard is correct. At the same time, pay attention to the identification and direction on the panel during installation to avoid reverse or incorrect insertion.