您好,欢迎进入厦门雄霸电子商务有限公司!

全国咨询热线

18059884797

热门关键词: ABB GE A-B TRICONEX Schneider

LE109A-1 交流断路器 可以快速切断高电压电路

联系电话:18059884797

产品详情

LE109A-1 交流断路器  可以快速切断高电压电路

LE109A-1.jpg


描述

LE109A-1 ALSTOM高压交流断路器产品介绍

ALSTOM LE109A-1是一种高压交流断路器,广泛应用于电力系统中的输电线路和变电站。产品说明

ALSTOMLE1094-1采用先进的气体绝缘技术,具有高可靠性、高安全性、长寿命等特点。它可以快速切断高电压电路,确保电力系统的安全运行。产品参数

·额定电压:123 kV·额定电流:3150 A

·额定频率:50/60 Hz·额定短路电流:40 kA

·额定短路开断时间:30 ms

产品规格

·外形尺寸:1050 mm x 2000 mm x 3000 mm

·重量:约8吨

·保护等级:IP67

。工作温度:-40℃到+55°℃

LE109A-1交流断路器是变电所主要的电力控制设备,当系统正常运行时,它能切断和接通线路及各种电气设备的空载和负载电流;当系统发生故障时,它和继电保护配合,能迅速切断故障电流,以防止扩大事故范围。因此,高压断路器工作的好坏,直接影响到电力系统的安全运行。


LE109A-1交流断路器的特性包括断路器的形式(极数、电流种类)、主电路的额定值和极限值(包括短路特性)、控制电路、辅助电路、脱扣器形式(分励脱扣器、过电流脱扣器、欠电压脱扣器等)、操作过电压等。


高压断路器的工作原理是利用电磁力作用,将断路器的触头打开或关闭,从而断开或接通高压电路。


LE109A-1高压断路器是一种用于断开或接通高压电路的电气设备。其主要原理是利用电磁力作用,将断路器的触头打开或关闭,从而断开或接通高压电路。当主触点闭合后,自由脱扣机构将主触点锁在合闸位置上。过电流脱扣器的线圈和热脱扣器的热元件与主电路串联,欠电压脱扣器的线圈和电源并联。当电路发生短路或严重过载时,过电流脱扣器的衔铁吸合,使自由脱扣机构动作,主触点断开主电路。当电路过载时,热脱扣器的热元件发热使双金属片上弯曲,推动自由脱扣机构动作。当电路欠电压时,欠电压脱扣器的衔铁释放。也使自由脱扣机构动作。分励脱扣器则作为远距离控制用,在正常工作时,其线圈是断电的,在需要距离控制时,按下起动按钮,使线圈通电。

LE109A-1 交流断路器  可以快速切断高电压电路

LE109A-1.jpg


Description

LE109A-1 ALSTOM high voltage AC circuit breaker Product introduction

The ALSTOM LE109A-1 is a high-voltage AC circuit breaker that is widely used in transmission lines and substations in power systems. Product description

ALSTOMLE1094-1 adopts advanced gas insulation technology, which has the characteristics of high reliability, high safety and long life. It can quickly cut off high-voltage circuits to ensure the safe operation of the power system. Product parameter

· Rated voltage :123 kV· Rated current :3150 A

· Rated frequency :50/60 Hz· Rated short circuit current :40 kA

· Rated short circuit breaking time :30 ms

Product specification

· Overall dimensions :1050 mm x 2000 mm x 3000 mm

· Weight: approx. 8 tons

· Protection level :IP67

. Operating temperature :-40℃ to +55 ℃

LE109A-1 AC circuit breaker is the main power control equipment of the substation. When the system is running normally, it can cut off and connect the no-load and load current of the line and various electrical equipment. When the system fails, it and relay protection cooperate to quickly cut off the fault current to prevent expanding the scope of the accident. Therefore, the working quality of the high-voltage circuit breaker directly affects the safe operation of the power system.


The characteristics of the LE109A-1 AC circuit breaker include the form of the circuit breaker (number of poles, current type), the rating and limit value of the main circuit (including short circuit characteristics), the control circuit, the auxiliary circuit, the release form (shunt release, overcurrent release, undervoltage release, etc.), and the operating overvoltage.


The working principle of the high-voltage circuit breaker is to use the electromagnetic force to open or close the contact of the circuit breaker, so as to disconnect or connect the high-voltage circuit.


The LE109A-1 high-voltage circuit breaker is an electrical device used to disconnect or connect high-voltage circuits. The main principle is to use the electromagnetic force to open or close the contact of the circuit breaker, so as to disconnect or connect the high-voltage circuit. When the main contact is closed, the free trip mechanism locks the main contact in the closing position. The coil of the overcurrent release and the thermal element of the thermal release are connected to the main circuit in series, and the coil of the undervoltage release is connected to the power supply in parallel. When the circuit occurs short circuit or serious overload, the armature of the overcurrent trip device draws, making the free trip mechanism operate, and the main contact disconnects the main circuit. When the circuit is overloaded, the heat element of the thermal trip device heats up to bend the bimetal sheet and push the free trip mechanism to act. When the circuit is under voltage, the armature of the undervoltage releaser is released. Also allows the free trip mechanism to operate. Shunt release is used as a remote control, in normal operation, the coil is powered off, in the need of distance control, press the start button to make the coil powered.

姗姗名片合并2(1).jpg

WOODWARD8200-1302FOXBOROFBMSVH
AUTOLIVGTW.MOD. B0110 627697900BABBDI01
KONGSBERGRMP201-9LAM810-370141-002
ABBCMA130 3DDE300411ABB5SHY3545L0011
ICS TRIPLEXT8111CBently3500/42M
WATL OWCLS216-10000000ABBAI04
ABBPFEA111-653BSE050091R65ABBGOP2
ABBPFEA111-653BSE050090R65FOXBOROFBMSVH
ENTERASYSA4H124-24TX P0973JMYASKAWACLSR-33-N2CE-1


查看更多 >>

产品推荐

18059884797