Alstom-MAE99-04 Alstom 电源管理模块 串行l/F隔离单元

型号:MAE99-04

描述:8CH串行l/F隔离单元

频率范围：14至60kHz

输入电压范围：0至55 VDC

工作温度：-40到85°F

Alstom MAE99-04集成在芯片上的电源管理模块

每个CU都以将特定的方式表示数值。例如，一些早期的数字计算机表示劬悉的数亨小数基数为1⑴0命数系统值，而其他人则采用了更不寻常的表示方法，如第三的基数三，几乎所有的现代CPU都用二进制的形式，每个数字由某个二值物理量表示，如"“高"或"低"电压。[g]

包含十进制值40的二进制编码表示形式的六位字。大多数现代CPU采用2的幂的字长，例如8、16、32或64位。与数字表示相关的是CPU可以表示的整数的大小和精度。

在二进制CPU的情况下，这是通过CPU在—次操

作中可以处理的位数(二进制编码整数的有效数字)来衡量的，通常称为单词大小位宽度数据路径宽度整数精度，或者整数大小。CPU的整数大小决定了它可以直接操作的整数值的范围。

MAE99-04隔离单元是应急医用模块化隔离单元，是同方威视研发的临时检疫室。

它具有模块化设计，可根据实际需求进行灵活组装和拆卸；还必须配备空气过滤设备和换气设备，保证空气质量符合严格的卫生标准；同时配有遥控紫外线（UV）消毒模块，可快速对装置内部区域进行消毒，确保安全无菌的环境。它的主要作用是减少因空气传播、飞沫传播或直接接触造成的工作人员与公众交叉感染的风险。

MAE99-04线性隔离器和数字隔离器的区别如下：

应用信号不同 。线性隔离器是用来隔离模拟信号的；数字隔离器是用来隔离数字信号的。

功能不同 。线性隔离器可以调节信号零点和满度；数字隔离器可以传递信号，同时隔断噪声。

电路设计不同 。线性隔离器的电路设计是模拟电路；数字隔离器的电路设计是数字电路。

Alstom-MAE99-04 Alstom 电源管理模块 串行l/F隔离单元

Model :MAE99-04

Description :8CH serial l/F isolation unit

Frequency range: 14 to 60kHz

Input voltage range: 0 to 55 VDC

Operating temperature: -40 to 85°F

Alstom MAE99-04 Integrated on-chip power management module

Each CU represents a number in a specific way. For example, some early digital computers represented numerals with a decimal base of 1 (0) numerals system value, while others adopted more unusual representations, such as the base three of the third, and almost all modern cpus are written in binary form, with each number represented by some binary physical quantity, such as "high" or "low" voltage. [g]

A six-bit word containing a binary-encoded representation of the decimal value 40. Most modern cpus use word lengths in powers of two, such as 8, 16, 32, or 64 bits. Related to the numeric representation is the size and precision of the integers that the CPU can represent.

In the case of binary cpus, this is done by the CPU at one time

As measured by the number of bits (significant digits of binary-encoded integers) that can be processed, often referred to as word size bit width data path width integer precision, or integer size. The CPU's integer size determines the range of integer values it can directly manipulate.

The MAE99-04 isolation unit is an emergency medical modular isolation unit, a temporary quarantine room developed by Nuctech.

It has a modular design, which can be flexibly assembled and disassembled according to actual needs; It must also be equipped with air filtration equipment and ventilation equipment to ensure that air quality meets strict hygiene standards; It is also equipped with a remote ultraviolet (UV) disinfection module to quickly disinfect areas inside the unit, ensuring a safe and sterile environment. Its primary role is to reduce the risk of cross-infection between staff and the general public due to airborne transmission, droplet transmission or direct contact.

The differences between the MAE99-04 linear isolators and digital isolators are as follows:

The application signal is different. Linear isolators are used to isolate analog signals; Digital isolators are used to isolate digital signals.

The function is different. The linear isolator can adjust the signal zero and full degree; Digital isolators can transmit signals while blocking noise.

The circuit design is different. The circuit design of linear isolator is analog circuit. The circuit design of the digital isolator is a digital circuit.以上翻译结果来自有道神经网络翻译（YNMT）· 通用场景