FENA-01 以太网适配器模块 支持ABB变频器和Transparent配置文件

FENA-01以太网适配器模块

F系列FENA-01是1端口以太网适配器，支持多个通信协议：PROFINET IO、EtherNet/IP和Modbus TCP。协议的选择在变频器内通过一个参数完成。

适配器模块支持PROFINET IO DP-V1通信。通过FENA-01/-11模块，PROFINET网络可以利用PROFIdrive配置文件或ABB变频器配置文件。此外，还提供两种透明模式——分别针对16位和32位的字。

FENA以太网适配器用作EtherNet/IP服务器，支持ODVA AC/DC Drive、ABB变频器和Transparent配置文件。该适配器模块既支持对一类的每个属性分别进行设置的显式报文，也支持使用输入和输出实例的隐式报文。

适配器模块用作Modbus TCP服务器，支持ABB变频器和Transparent配置文件。支持通用的读/写单寄存器功能代码和多寄存器功能代码。

以太网适配器模块是一种用于将计算机或其他设备连接到以太网网络的硬件设备。它通常是一个插件模块，可以插入计算机的扩展插槽或其他设备的接口中。

FENA-01以太网适配器模块通常包括一个网络接口控制器（NIC）芯片，用于处理以太网协议和数据传输。它还包括一个物理接口，例如 RJ45 插孔，用于连接以太网电缆。

FENA-01以太网适配器模块可以用于各种设备，例如计算机、服务器、交换机、路由器等。它们通常用于连接到局域网（LAN）或广域网（WAN），以实现设备之间的通信和数据传输。

在选择以太网适配器模块时，需要考虑设备的接口类型、网络速度、兼容性和可靠性等因素。同时，还需要考虑网络的拓扑结构和需求，以选择适当的以太网适配器模块。

FENA-01 以太网适配器模块 支持ABB变频器和Transparent配置文件

FENA-01 Ethernet adapter module

The F-Series FENA-01 is a 1-port EtherNet adapter that supports multiple communication protocols: PROFINET IO, EtherNet/IP, and Modbus TCP. The selection of the protocol is done by a parameter in the inverter.

The adapter module supports PROFINET IO DP-V1 communication. With the FENA-01/-11 module, the PROFINET network can take advantage of the PROFIdrive profile or ABB inverter profile. In addition, two transparency modes are available - one for 16-bit and one for 32-bit words.

The FENA EtherNet adapter acts as an EtherNet/IP server, supporting ODVA AC/DC Drive, ABB inverter, and Transparent profile. The adapter module supports both explicit messages that set each attribute of a class separately and implicit messages that use input and output instances.

The adapter module acts as a Modbus TCP server, supporting ABB drives and Transparent profiles. Support general read/write single register function code and multi-register function code.

An Ethernet adapter module is a hardware device used to connect a computer or other device to an Ethernet network. It is usually a plug-in module that can be plugged into the expansion slot of a computer or the interface of another device.

The FENA-01 Ethernet adapter module typically includes a Network interface controller (NIC) chip to handle Ethernet protocols and data transfer. It also includes a physical interface, such as an RJ45 jack, for connecting the Ethernet cable.

The FENA-01 Ethernet adapter module can be used on various devices, such as computers, servers, switches, routers, etc. They are typically used to connect to local area networks (Lans) or wide area networks (Wans) to enable communication and data transfer between devices.

When selecting an Ethernet adapter module, consider the interface type, network speed, compatibility, and reliability of the device. At the same time, it is also necessary to consider the topology and requirements of the network to select the appropriate Ethernet adapter module.