IMRIO02   远程I/o模块  用于MFP和远程从模块之间的通信

品牌:ABB

型号:ABB IMRIO02

产品说明:远程I/o模块

IMRIO02远程输入输出从属模块用于MFP和远程从模块之间的通信

远程/O模块(IMRIO02)与Bailey多功能处理器(IMMFP01/02/03)—起操作，在工厂范围内提供强大的控制能力。远程I/O模块设计用于MFP和远程从模块之间的通信。

ABBIMRIO02远程l/o模块直流电源连接将25VDC(标称)电源的+和-导线连接到端子接头上的顶部两个端子。这些连接对AC/DC输入电源的极性不敏感。(但是，本章稍后将讨论的仅直流输入型电源对极性敏感。）输入过电压保护装置此信息适用于除IC693PWR322和IC693PWR 328之外的所有90-30系列电源。

ABBIMRIOO2该电源的过电压保护装置内部连接到用户接线板上的引脚4。该针脚通常通过出J厂时安装的跨接导线与机架接地(针脚3)相连。如果不需要过电压保护或在上游提供过电压保护，则可以通过从引脚3和4上拆下跨接带来禁用此功能。如果要对该电源进行高压测试，则必须在测试期间通过拆下端子板跨接带禁用过电压保护。测试后，通过重新安装跳线带重新启用过电压保护。跳线带将过电压保护装置连接到接线板上的框架接地螺钉端子ABB IMRIO02.

主营品牌

bently本特利，GE，ABB，EPRO，艾默生，霍尼韦尔，AB，横河，英维斯,福克斯波罗，莫迪康140，HIMA，西门子6DD,6DP，西屋，摩尔，ICS，巴赫曼，恩泰克...等PLC,DCS模块卡件

PLC硬件组成

PLC的硬件主要由中央处理器(CPU)、存储器、输入单元、输出单元、通信接口、扩展接口、电源等部分组成。其中CPU是PLC的核心，按照系统程序赋予的功能，指挥PLC有条不紊地进行工作

IMRIO02   远程I/o模块  用于MFP和远程从模块之间的通信

Brand :ABB

Model :ABB IMRIO02

Product description: Remote I/o module

IMRIO02 Remote I/O slave module is used for communication between MFP and remote slave module

The Remote /O module (IMRIO02) operates with the Bailey multifunction processor (IMMFP01/02/03) to provide powerful factory-wide control. The remote I/O module is designed for communication between the MFP and remote slave modules.

ABBIMRIO02 Remote l/o Module DC Power connection Connect the + and - wires of the 25VDC(nominal) power supply to the top two terminals on the terminal connector. These connections are insensitive to the polarity of the AC/DC input power supply. (However, the DC-only power supply discussed later in this chapter is polarity sensitive.) Input overvoltage protection device This information applies except IC693PWR322 and

All 90-30 series power supplies except IC693PWR 328. ABBIMRIOO2 The power supply's overvoltage protection is internally connected to pin 4 on the user's patch board. The pin is usually connected to the frame ground (pin 3) by a jumper wire installed at the exit of the J plant. If overvoltage protection is not required or provided upstream, this feature can be disabled by removing the jumper from pins 3 and 4. If the power supply is to be tested for high voltage, overvoltage protection must be disabled during the test by removing the terminal board jumper tape. After testing, re-enable overvoltage protection by reinstalling the jumper tape. The jumper tape connects the overvoltage protection to the frame ground screw terminal ABB IMRIO02 on the patch board.

Main brand

bently Bentley, GE, ABB, EPRO, Emerson, Honeywell, AB, Yokogawa, Ingves, Foxboro, Modicon 140, HIMA, Siemens 6DD,6DP, Westinghouse, Moore, ICS, Bachmann, Entech... Such as PLC,DCS module card

PLC hardware composition

The hardware of PLC is mainly composed of central processing unit (CPU), memory, input unit, output unit, communication interface, expansion interface, power supply and so on. Among them, CPU is the core of PLC, and commands PLC to work methodically according to the function given by the system program