DT680E  控制器  16个数字输出进行数据采集和控制

DT680E GJR2923100R1 DT680B-E控制器是一款高性能控制系统，专为各种工业应用而设计。它具有先进的控制算法和用户友好的界面，使其易于配置和操作。

产品参数

输入电压:24VDC

输出电压:24VDC

最大电流:10A

通信协议:Modbus RTU

工作温度:-10℃~ 50℃

存储温度:-20℃~ 70℃

规格

外形尺寸:150mm × 100mm × 50mm

重量:500g

外壳等级:IP20

安装:DIN导轨

认证:CE, RoHS

规格

采用先进的技术，具有高速、高精度、可靠、稳定的特点。

可通过16个数字输入和16个数字输出进行数据采集和控制。

支持24VDC输入和输出，适用于各种工业控制系统。

尺寸小巧，安装方便。

适用于工业自动化控制系统。

控制器是指按照预定顺序改变主电路或控制电路的接线和改变电路中电阻值来控制电动机的启动、调速、制动和反向的主令装置。

DT680E控制器由程序计数器、指令寄存器、指令译码器、时序产生器和操作控制器组成，它是发布命令的“决策机构”，即完成协调和指挥整个计算机系统的操作。

控制器的基本功能是从主存中取出一条指令，并指出下一条指令在主存中的位置；对指令进行译码或测试，产生相应的操作控制信号，以便启动规定的动作；指挥并控制CPU、主存、输入和输出设备之间的数据流动方向。

DT680E控制器的工作原理是根据指令的要求，当前的时序及外部和内部的状态，按时间的顺序发送一系列微操作控制信号。

控制器根据产生微操作控制信号的方式不同，可分为硬布线控制器和微程序控制器。

DT680E  控制器  16个数字输出进行数据采集和控制

Product description

The DT680E GJR2923100R1 DT680B-E controller is a high performance control system designed for a variety of industrial applications. It has advanced control algorithms and a user-friendly interface that makes it easy to configure and operate.

Product parameter

Input voltage :24VDC

Output voltage :24VDC

Maximum current :10A

Communication protocol :Modbus RTU

Operating temperature :-10℃~ 50℃

Storage temperature :-20℃~ 70℃

specification

Overall dimensions :150mm × 100mm × 50mm

Weight :500g

Housing grade :IP20

Mounting :DIN rail

Certification :CE, RoHS

specification

With advanced technology, it has the characteristics of high speed, high precision, reliability and stability.

Data acquisition and control can be performed through 16 digital inputs and 16 digital outputs.

Support 24VDC input and output, suitable for various industrial control systems.

Small size, easy to install.

Suitable for industrial automation control system.

The controller refers to the main command device that changes the wiring of the main circuit or control circuit and changes the resistance value in the circuit to control the start, speed regulation, braking and reverse of the motor in accordance with the predetermined sequence.

DT680E controller is composed of program counter, instruction register, instruction decoder, timing generator and operation controller, it is a "decision mechanism" to issue commands, that is, to complete the coordination and command the operation of the whole computer system.

The basic function of the controller is to take out an instruction from main memory and point out the position of the next instruction in main memory. Decode or test instructions to generate corresponding operational control signals in order to initiate specified actions; Direct and control the direction of data flow between CPU, main memory, input and output devices.

The working principle of the DT680E controller is to send a series of microoperating control signals in the order of time according to the requirements of the instruction, the current timing and the external and internal states.

The controller can be divided into hardwired controller and microprogrammed controller according to the way of generating microoperating control signal.