83SR04C-E GJR2390200R1411/GJR2390211R45输出模块可以输出信号

产品详情：

81EU01E-E GJR2391500R1210模块输入端如果设置为“常开检线”状态输入，模块输入线末端（远离模块端）必须并联一个4.7kΩ的终端电阻；模块输入端如果设置为“常闭检线”状态输入模块输入线末端（远离模块端）必须串联一个4.7kΩ的终端电阻。81EU01E-E GJR2391500R1210模块为有源输出时,有源输出端应并联一个4.7kΩ的终端电阻，并串联一个IN4007二极管。83SR04C-E GJR2390200R1411/GJR2390211R45输入输出模块也称为控制模块，在有控制要求时可以输出信号，或者提供一个开关量信号，使被控设备动作，同时可以接收设备的反馈信号，以向主机报告，是火灾报警联动系统中重要的组成部分，市场上的83SR04C-E GJR2390200R1411/GJR2390211R45输入输出模块都可以提供一对无源常开/常闭触点，用以控制被控设备，部分厂家的模块可以通过参数设定，设置成有源输出,相对应的还有双输入输出模块、多输入输出模块等等。

Sr04c - 83 E GJR2390200R1411 / GJR2390211R45 output module connected in the controller circuit on the bus, can be installed in the control equipment of the nearby, also can be installed on the floor in the terminal module. Using electronic coding, can be field coding. 83 sr04c - E GJR2390200R1411 / GJR2390211R45 output module of the output control logic made can be programmed according to the engineering situation. When the controller receives the alarm signal of the detector, according to the pre-programmed program, the controller transmits the linkage control signal to the output module through the bus, and the output module starts the fire fighting equipment that needs linkage; The device responds to the action with a signal.