81EU01E-E GJR2391500R1210 通用输入模块

产品详情：

81EU01E-E GJR2391500R1210 输入输出模块也称为控制模块，在有控制要求时可以输出信号，或者提供一个开关量信号，使被控设备动作，同时可以接收设备的反馈信号，以向主机报告，是火灾报警联动系统中重要的组成部分，市场上的输入输出模块81EU01E-E GJR2391500R1210都可以提供一对无源常开/常闭触点，用以控制被控设备，部分厂家的模块可以通过参数设定，设置成有源输出81EU01E-E GJR2391500R1210,相对应的还有双输入输出模块、多输入输出模块等等。

产品ID: GJR2391500R1210

ABB型号:81EU01E-E

目录描述:81EU01通用输入模块

长描述:16倍二进制和模拟发射机

关税税号:85423190

产品净深度/长度:198mm

产品净高:261mm

产品净宽:20mm

产品净重:0.5 kg

The 81EU01E-E GJR2391500R1210 Input/output module has two coded addresses, two coded addresses are consecutive, and the maximum coded address is 242. It can receive two commands of different actions from the controller, and has the functions of two different control output and confirming two different input answer signals. The required input signal of this module is normally open switch signal. Once the switch signal is activated, 81EU01E-E GJR2391500R1210 will send the switch signal to the controller through the linkage bus, and the linkage controller will generate alarm and display the address number of the operating device. When the module itself fails, the controller will also generate an alarm and display the module number. This module has two pairs of normally open, normally closed contacts and two groups of active output, input and output with line detection function.