VBS01 ABB 连接器 用于单个模块

VBSO1-FPH

一般信息

货号:vBSO1-FPH

类型;vBSO1-FPH

定义:垂直。底座、单台、现场压接机、热

定义:

垂直立柱安装底座，用于单个模块，系统为现场设备供电(开关热)，2x8信号端子，用于现场电源输入的5A保险丝接线端子，需要2x16针5mm可插拔连接器。与AIO1、AIO2、DI01、DI02、DIO3、DIO4、DO01、DO02、PIO1一起使用

类别

产品w操作系统”Symphony Plus ol/ Os w SD series l/O .VBS01-XXX Bases

产品w控制系统产品wl/O产品”S+ SDI/O wSDI/o-端接基座》VBSO1-FPH端接基座”VBSO1-FPH端接其座

技术规格产品类型;

Module_Termination_Unit

订购信息

海关编码:

853710--配备两个或两个以上品目85.35或85.36的用于电气控制或配电的装置的板、面板、控制台、桌子、机柜和其他底座，包括包含第9o章的仪器或装置的装置，以及数控装置，但品目85.17的开关装置除外。

海关税则号:85371091

尺寸

产品净深度;27o毫米

产品净高:130毫米

产品净宽:10o毫米

产品净重:О千克

环境

wEEE类别;5.小型设备(外部尺寸不超过5o厘米)

电池数量:o

上海化学工业区:没有SVHC存在印度﹐(IN)

VBS01-EPD电子式漏电保护器适用于家庭、商业及工业环境，具有漏电保护、过载保护和短路保护等功能。产品使用说明

1.请先关闭所有连接到VBS01-EPD保护器的电器。2.将VBS01-EPD保护器插入电源插座。

3.将需要保护的电器连接到VBS01-EPD保护器。4.打开电源，VBS01-EPD保护器即可开始工作。

产品介绍

VBSO1-EPD电子式漏电保护器采用先进的电子技术，能够快速准确地检测漏电电流，实现漏电保护、过载保护和短路保护等多种保护功能。产品外观简洁美观，易于安装和使用。

VBS01 ABB 连接器 用于单个模块

VBSO1-FPH

General information

Item Number :vBSO1-FPH

Type; vBSO1-FPH

Definition: Vertical. Base, single, field crimping machine, hot

Definition:

The base is installed on the vertical column for a single module. The system supplies power to field devices (switch heat). 2x8 signal terminals. 5A fuse terminals for field power input require a 2x16 pin 5mm pluggable connector. Use with AIO1, AIO2, DI01, DI02, DIO3, DIO4, DO01, DO02, PIO1

category

Symphony Plus ol/ Os w SD series l/ O.VBS01-XXX Bases

Product w Control System product wl/O Product "S+ SDI/O wSDI/o- Terminal base" VBSO1-FPH terminal base "VBSO1-FPH terminating base

Technical specifications Product type;

Module_Termination_Unit

Ordering information

Customs Code:

853710- Boards, panels, consoles, tables, cabinets and other bases equipped with two or more devices for electrical control or distribution of heading 85.35 or 85.36, including devices containing instruments or devices of Chapter 9o, and numerical control devices, except switching devices of heading 85.17.

Customs tariff Code :85371091

dimension

Net product depth; 27o mm

Product height :130 mm

Product width :10o mm

Net weight: kg

environment

wEEE category; 5. Small equipment (external size does not exceed 5o cm)

Number of batteries :o

Shanghai Chemical Industrial Zone: No SVHC exists IN India,(IN)

VBS01-EPD electronic leakage protector is suitable for home, commercial and industrial environment, with leakage protection, overload protection and short circuit protection. Product instructions

1. Turn off all electrical appliances connected to the VBS01-EPD protector first. 2. Plug the VBS01-EPD protector into the power socket.

3. Connect the appliance that needs protection to the VBS01-EPD protector. 4. Turn on the power, and the VBS01-EPD protector can start working.

Product introduction

VBSO1-EPD electronic leakage protector adopts advanced electronic technology, can detect leakage current quickly and accurately, and realize a variety of protection functions such as leakage protection, overload protection and short circuit protection. The product appearance is simple and beautiful, easy to install and use.