PM861AK01 ABB 冗余控制器模块 用于电气控制

编号:3BSEO18157R1

—般信息

产品编号:

编号:3BSEO18157R1

ABB型号名称:PM861AKO1

目录说明:PM861AKO1处理器单元

详细描述:PM861AKO1处理器单元

类别

产品”控制系统产品”控制与通讯”AC 800M 》AC 800M-处理器模块”PM861A处理器单元》PM861AKO1处理器单元

产品w控制系统”800xA”控制器”AC 800M控制软件”AC 800M控制软件4.0”中央单元

产品w控制系统”800xA”控制器”AC 800M Hardware w AC 800M Hardware 4.0 " Central Units产品w控制系统”800xA”控制器”AC 800M Hardware n AC 800M Hardware 4.1 ” Central Units产品工控制系统800xA”控制器”AC 800M Hardware wAC 800M Hardware 5.0 " Central Units显示全部...

其他信息介质描述:PM861AKO1处理器单元

产品类型:central_Unit

订购

海关编码:

853710--配备两个或两个以上品目85.35或85.36的用于电气控制或配电的装置的板、面板、控制台、桌子、机柜和其他底座，包括包含第90章的仪器或装置的装置，以及数控装置，但品目85.17的开关装置除外。

海关税则号:85371091

尺寸

产品净深度/长度:119毫米

产品净高:189毫米

产品净宽:135毫米

产品净重;1.15干克

分类

危险品联合国分类;

第9类:杂项危险物质和物品，包括对环境有害的物质

危险品UN编号:UN3O91-PI97o型

环境的

RoHS状态:不符合RoHs标准

WEEE类别:5.小型设备(外部尺寸不超过5o厘米)

电池数量:

电池化学成分:锂

电池类型:;便携式

电池重量:9克

上海化学工业区:4908a38c-27Of-4b45-8a26-aO1ebd728773瑞典

PM861 PM861A PM861AKO1单元CPU冗余控制器模块

PM861RISC 32位实时多任务微处理器

16 MB RAM具有错误检测与校正

后备电池保持,包括电池电压监控

EPROM,串行,16 Kbit

内置温度检测设备

Watchdog

支持12个现场总线模件扩展

2个Ethernet 接口,2个RS 232C接口，ModuleBus电气及光纤扩展

现场控制器可冗余设置，切换时间小于10ms

多至16个任务，最小任务周期1ms，SOE顺序发生事件分辨率小于1ms

PM861A控制器的底板有两个RJ45以太网端口(CN1、CN2)用于连接到控制网络，以及两个RJ45串行端口(COM3、COM4)。其中一个串行端口(COM3)是带有调制解调器控制信号的RS-232G端口，而另一个端口(COM4)则被隔离并用于连接配置工具。控制器支持CPU冗馀以实现高可用性(CPU、CEX总线、通信接口和S800 l/O).

简单DIN轨道连接/御料程序，使用唯一的滑道&锁机构。所有base plates都有唯一的以太网地址，每个CPU都有一个硬件标识。地址可以在连接到TP830 base plate的以太网地址标签上找到。

PM861AK01 ABB 冗余控制器模块 用于电气控制

Number :3BSEO18157R1

- General Information

Product Number:

Number :3BSEO18157R1

ABB model name :PM861AKO1

Directory Description :PM861AKO1 processor unit

Details :PM861AKO1 processor unit

category

Products "Control System Products" Control and Communication "AC 800M" AC 800M- Processor module "PM861A Processor Unit" PM861AKO1 processor unit

Product w Control System "800xA" Controller "AC 800M Control Software" AC 800M Control Software 4.0 "Central unit

Product w Control System "800xA" Controller AC 800M Hardware w AC 800M Hardware 4.0 "Central Units Product w Control system" 800xA "controller AC 800M Hardware n AC 800M Hardware 4.1 "Central Units Product Engineering Control System 800xA" Controller "AC 800M Hardware wAC 800M Hardware 5.0" Central Units Display all...

Other information media description :PM861AKO1 processor unit

Product type :central_Unit

order

Customs Code:

853710- Boards, panels, consoles, tables, cabinets and other bases equipped with two or more devices for electrical control or distribution of heading 85.35 or 85.36, including devices containing instruments or devices of Chapter 90, and numerical control devices, except switching devices of heading 85.17.

Customs tariff Code :85371091

dimension

Net depth/length: 119mm

Product height: 189mm

Product width :135 mm

Net weight of the product; 1.15 dry grams

sort

Dangerous goods United Nations classification;

Category 9: Miscellaneous hazardous substances and articles, including substances harmful to the environment

Dangerous goods UN Number :UN3O91-PI97o type

environmental

RoHS status: does not meet RoHs standards

WEEE Category :5. Small equipment (external size does not exceed 5o cm)

Number of batteries:

Battery chemical composition: lithium

Battery type :; portable

Battery weight :9 grams

Shanghai Chemical Industrial Zone :4908a38c-27Of 4b45-8a26-aO1ebd728773 Sweden

PM861 PM861A PM861AKO1 Unit CPU Redundant controller module

PM861RISC 32-bit real-time multitasking microprocessor

16 MB RAM with error detection and correction

Backup battery retention, including battery voltage monitoring

EPROM, serial,16 Kbit

Built-in temperature detection equipment

Watchdog

Supports 12 fieldbus module extensions

2 Ethernet ports,2 RS 232C ports, ModuleBus electrical and fiber extensions

The field controller can be configured redundantly, and the switching time is less than 10ms

Up to 16 tasks, minimum task period 1ms, SOE sequence event resolution less than 1ms

The baseplate of the PM861A controller has two RJ45 Ethernet ports (CN1, CN2) for connecting to the control network, and two RJ45 serial ports (COM3, COM4). One of the serial ports (COM3) is an RS-232G port with a modem control signal, while the other port (COM4) is isolated and used to connect to the configuration tool. The controller supports CPU redundancy for high availability (CPU, CEX bus, communication interface, and S800 l/O).

Simple DIN track connection/bending procedure with unique slide & lock mechanism. All base plates have a unique Ethernet address, and each CPU has a hardware ID. The address can be found on the Ethernet address label connected to the TP830 base plate.