PM783F-3BDH000364R0002 ABB CPU模块 通道的短路和断线检测

编号:3BDHO00364ROO02

一般信息

产品编号:

编号:3BDHOO0364RO002

ABB型号名称:PM 783F

目录说明;PM783F CPU模块

详细描述:

中央处理器(CPU)模块配备高性能处理器，可实现快速循环时间。它带有板载100 Mbit/s 以太网网络连接，用于控制器、操作站和工程工具之间的通信。两个串行线路接口完成了连接。一个接口可用于Modbus通信，而另一个接口用于诊断。CPU有10 MB内存，其中2MB是电池备份。对于要求苛刻的应用，可以配置八个循环时间和可调循环时间的循环和优先级驱动任务，以及一个运行速度尽可能快的循环PLC型任务。小型前面板显示屏直接在模块上显示状态和诊断信息。此外，您可以通过钥匙锁定控制器。这意味着可以阻止控制器下载应用程序和固件，以增强安全性。如果控制器处于锁定或解锁状态，则状态会显示在显示屏上。s700 I/o模块可以直接插入CPu模块，也可以通过PROFIBUS用作远程I/O。一个控制器最多可以连接八个模块。第三方I/O可以通过MODBUS ASCll / RTU、IEC 3-60870-5远程控制协议或通过PROFIBUS连接。CPU和本地S101I/o模块的通信速度非常快。l/o扫描时间可达700 ms。实现每个通道的短路和断线检测。

类别产品”控制系统”Freelance ”控制器”AC 80oF Central Units ”PM 8O3F其他信息

介质描述:

PM783F是一款在PLC硬件上运行的DCS，特别适用于由几个到大约300个I/o信号组成的小型应用。它没有操作系统。在软件安装过程中必须加载操作系统。需要外部24 vDC电源。

软件版本9.2SP2或更高版本是必需的。有关先前版本的操作，请参阅产品更新信息.2PAA102068R0018。与端子底座TB711F和电池TA521一起使用。

产品类型:Central_Unit

订购

海关编码:853890--适合单独或主要与品目85.35、85.36或85.37的设备一起使用的部件。

海关税则号:85389091

尺寸

产品净深度/长度:54毫米

产品净高:76毫米

产品净宽:67.5毫米

产品净重:0.15千克

环境的

RoHS状态:不符合RoHs标准

wEEE类别:5.小型设备(外部尺寸不超过5o厘米)

电池数量:0

PM783F-3BDH000364R0002 ABB CPU模块 通道的短路和断线检测

Number :3BDHO00364ROO02

General information

Product Number:

Number :3BDHOO0364RO002

ABB model name :PM 783F

Directory description; PM783F CPU module

Detailed description:

The Central processing unit (CPU) module is equipped with a high-performance processor for fast cycle times. It comes with an onboard 100 Mbit/s Ethernet network connection for communication between controllers, operating stations, and engineering tools. The two serial line interfaces are connected. One interface can be used for Modbus communication, while the other is used for diagnostics. The CPU has 10 MB of memory, of which 2MB is battery backup. For demanding applications, cycle and priority driven tasks with eight cycle times and adjustable cycle times can be configured, as well as a cycle PLC-type task that runs as fast as possible. A small front panel display displays status and diagnostic information directly on the module. In addition, you can lock the controller with a key. This means that the controller can be prevented from downloading applications and firmware for increased security. If the controller is locked or unlocked, the status is displayed on the display. The s700 I/O module can be plugged directly into the CPu module or used as remote I/O via PROFIBUS. A controller can be connected to a maximum of eight modules. Third-party I/ OS can be connected via MODBUS ASCll/RTU, IEC 3-60870-5 remote control protocol, or via PROFIBUS. The communication speed between the CPU and the local S101I/o module is very fast. l/o scan time up to 700 ms. Short circuit and broken line detection for each channel.

Category Product "Control System" Freelance Controller "AC 80oF Central Units" PM 8O3F Other information

Medium description:

The PM783F is a DCS that runs on PLC hardware and is particularly suitable for small applications consisting of a few to around 300 I/o signals. It doesn't have an operating system. The operating system must be loaded during the software installation. Requires an external 24 vDC power supply.

Software version 9.2SP2 or later is required. For operations on previous versions, see Product Update information.2PAA102068R0018. Use with terminal base TB711F and battery TA521.

Product type :Central_Unit

order

Customs Code :853890- Parts suitable for use alone or mainly with equipment of heading 85.35, 85.36 or 85.37.

Customs Code :85389091

dimension

Product net depth/length :54 mm

Product height :76 mm

Product width: 67.5mm

Net weight: 0.15kg

environmental

RoHS status: does not meet RoHs standards

wEEE Category :5. Small equipment (external size does not exceed 5o cm)

Battery number :0