PM253V01 ABB 处理器机器人 远程无线监控

型号：PM253V01

类别：ABB。

ABB产品广泛应用于：电力、石油、矿井提升、港口、供热、燃气、供水、污水处理、冶金、造纸、纺织、化工、水利等现代化工业领域。

ABB Advant控制器250、ABB Advant ocs.预计装运尺寸

尺寸:7.0"x2.0"x 5.0”

(17.8cmx5.1 cmx 12.7 cm)

重量:0磅15.0盎司(0.4千克)

PM253V01 492943601ABB处理器机器人通常需要接收其它设备或传感器的信号才能完成指派的生产任务,比如:要将板链上某个货物搬运到另一个地方PM253V01 492943601ABB处理器首先就要确定货物是否到达了指定的位置,这就需要一个位置传感器(到位开关)。当货物到达指定位置后;传感器给机器人发送一个信号。PM253V01 492943601ABB处理器机器人接到这个信号后,就执行相应的操作,比如按照预定的轨迹开始搬运。

处理器机器人：

PM253V01机器人系统无线通信种类少、频次小，对时效性要求较高，现阶段以本体计算、执行为主，远程无线监控、控制为辅，以RJ45有线网口为核心。

正解：PM253V01装工业级ARM处理器 经过前面的踩雷试错，我们可以总结出机器人处理器的真正要求：

需具备较高性能的通用处理器CPU，以支撑机器人实时运算和控制。

需具备较高可拓展性的GPU、NPU，以完成AI所需的繁重计算量。

接口丰富，适配多RJ45网口、多USB、LVDS、MiniPCIE、SDIO、UART、485、CAN、I2C、PWM、GPIO等。

物理尺寸小、可靠性高。

尽可能降低功耗和散热要求。

性价比高。

PM253V01机器人和人工智能的区别如下：

质不同 。PM253V01机器人是一种能够半自主或全自主工作的智能机器；人工智能是研究、开发用于模拟、延伸和扩展人的智能的理论、方法、技术及应用系统的一门新的技术科学。

特点不同 。机器人具有感知、决策、执行等基本特征；人工智能包括机器学习、计算机视觉等，人工智能研究的一个主要目标是使机器能够胜任一些通常需要人类智能才能完成的复杂工作。

应用不同 。机器人主要用于物理操作和执行任务；人工智能则侧重于模拟和学习人类的智能。

PM253V01 ABB 处理器机器人 远程无线监控

Model: PM253V01

Category: ABB.

ABB products are widely used in: power, petroleum, mine lifting, port, heating, gas, water supply, sewage treatment, metallurgy, paper, textile, chemical, water conservancy and other modern industrial fields.

ABB Advant Controller 250, ABB Advant ocs. Estimated shipping size

Size :7.0"x2.0"x 5.0"

(17.8cmx5.1 cmx 12.7 cm)

No recognition result

Weight :0 lb 15.0 oz (0.4 kg)

PM253V01 492943601ABB processor robots often need to receive signals from other devices or sensors to complete assigned production tasks, such as moving a load on a board chain to another place PM253V01 492943601The ABB processor first determines whether the goods have arrived at the specified location, which requires a position sensor (position switch). When the goods arrive at the designated location; The sensor sends a signal to the robot. When the PM253V01 492943601ABB processor robot receives this signal, it performs the corresponding action, such as starting to move according to the predetermined trajectory.

Processor robot:

The PM253V01 robot system has few wireless communication types, small frequency, and high timeliness requirements. At this stage, it is mainly based on ontology calculation and execution, supplemented by remote wireless monitoring and control, and takes RJ45 wired network port as the core.

Positive solution: PM253V01 installed industrial-grade ARM processor through the front of the mine trial and error, we can sum up the real requirements of the robot processor:

It is necessary to have a general processor CPU with high performance to support the real-time calculation and control of the robot.

Gpus and Npus with high scalability are needed to complete the heavy computation required by AI.

Multiple RJ45 network ports, USB, LVDS, MiniPCIE, SDIO, UART, 485, CAN, I2C, PWM, GPIO, etc.

Small physical size, high reliability.

Minimize power consumption and heat dissipation requirements.

High cost performance.

The differences between PM253V01 robots and artificial intelligence are as follows:

The quality is different. PM253V01 robot is a kind of intelligent machine which can work semi-autonomously or fully autonomously. Artificial intelligence is a new technical science that studies and develops theories, methods, technologies and application systems used to simulate, extend and expand human intelligence.

The characteristics are different. The robot has the basic characteristics of perception, decision making and execution. Artificial intelligence includes machine learning, computer vision, etc. A major goal of artificial intelligence research is to make machines capable of complex tasks that usually require human intelligence.

The application is different. Robots are mainly used for physical operation and performing tasks; Artificial intelligence focuses on simulating and learning from human intelligence.