DO801 ABB 数字输出 电流源

基本信息

货号：DO801

编号:3BSEO20510R1

类型：数字输出

信号规格：24V直流(12- 32V直流), 0.5A

通道数：16

信号类型：电流源，电流限制

哈特：不

国企：不

冗余：不

高完整性：不

本质安全：不

力学：S80OL系列

DO801是用于S16I/o的24

通道800v数字输出模块。输出电压范围为10至30 v，最大连续输出电流为0.5A。输出具有短路、过压和过温保护功能。输出位于一个隔离组中。每个输出通道由短路和过温保护的高侧驱动器、EMC保护元件、感性负载抑制、输出状态指示LED和光隔离栅组成。

DO801特点和优势

- 16个通道，用于24V直流电流源输出 1个隔离组，每组16个通道

。输出状态指示灯

. OSP在通信错误时将输出设置为预定状态对地和30V短路保护

。过压和过热保护

。通过可拆卸连接器进行过程和电源连接

s800 1/o一种完整的分布式模块化过程I/O系统,通过标准现场总线与母控制器实现通讯。由于其具有较为广泛的连接性﹐所以能够适用于ABB及其它供应商的各种过程控制器。

系统可现场安装，与传感器及觖发器相邻，布线成本低，所以S800I/O可大大降低安装成本。由于具有支持热插拔的模块,在线重新组态及冗余选项，系统支持了生产效率的提高,使工程盈利大大提高。

s8oo 1/o特点包括:

·完整的产品系列·灵活的组态和安装·便于装配

·高可靠性和准确度HART协议验证-I/o模块冗余

·高完整性l/o模块( SIL3认证)·高精度时间标记

·通讯出错输出设定

·具有内在安全接口的I/o模块

应用

s80ol/o已被全球多种工业和控制系统所采用。

各种程序需要在信号接口及现场布线中具有高度的灵活性,满足用户规范、工程或维护需求。

在具体安装过程中﹐采用终端连接及信号适配产品来满足连接需求。

DO801 ABB 数字输出 电流源

Basic information

Item number: DO801

Number :3BSEO20510R1

Type: Digital output

Signal specification: 24V DC (12-32V DC), 0.5A

Number of channels: 16

Signal type: Current source, current limiting

Hart: No

State-owned enterprises: No

Redundancy: No

High integrity: No

Intrinsically safe: No

Mechanics: S80OL series

The DO801 is a 24-channel 800v digital output module for the S16I/o. The output voltage ranges from 10 to 30 v with A maximum continuous output current of 0.5A. The output has short circuit, overvoltage and overtemperature protection. The output is in a quarantine group. Each output channel consists of high side drivers for short circuit and overtemperature protection, EMC protection elements, inductive load suppression, output status indicator leds and optical isolation barriers.

DO801 Features and benefits

- 16 channels for 24V DC current source output 1 isolation group, each group of 16 channels

. Output status light

.OSP sets the output to the predetermined state to ground and 30V short circuit protection in case of a communication error

. Protection against overpressure and overheating

. Process and power connections via removable connectors

The s800 1/o is a complete distributed, modular process I/O system that communicates with the parent controller via a standard fieldbus. Due to its extensive connectivity, it is suitable for a wide range of process controllers from ABB and other suppliers.

The system can be installed on site, adjacent to the sensor and 觖 generator, and the wiring cost is low, so the S800I/O can greatly reduce the installation cost. Thanks to the hot-swappable module, online reconfiguration and redundancy options, the system supports the improvement of production efficiency and greatly improves project profitability.

s8oo 1/o features include:

· Complete product range · Flexible configuration and installation · Easy assembly

High reliability and accuracy HART protocol validation -I/o module redundancy

· High integrity l/o module (SIL3 certified)· High precision time stamp

· Communication error output setting

I/o modules with built-in security interfaces

Apply

The s80ol/o is used in a variety of industrial and control systems worldwide.

Various programs require a high degree of flexibility in signal interfaces and field wiring to meet user specifications, engineering or maintenance needs.

In the specific installation process, the terminal connection and signal adaptation products are used to meet the connection requirements.