CP-E-24-1.25 ABB 开关电源 提供U/输出特性

基本信息

cp-e 24/1.25

http://www.svr427031ro001

目录说明:

CP-E 24/1.25: 100-24oVAC:24VDC/1.25A

详细描述:

Cp-e 24/1.25主开关模式电源提供85 - 264伏和90 - 375 vdc的宽输入范围,额定输入电压为100 - 240 v AC。30w, 1.25A, 24v DC。输出电压可在24至28 v直流范围内调节该电源提供U /输出特性,并允许并联操作以实现冗余,另一个特点是信号输出(晶体管)用于输出电压正常。冗余单元可作为附件提供。

类别

“

零部件”中压产品和系统”服务”备件和耗材“零件”所有备件(继电器-swG-CB)订购

最小起订量:1件

海关税则号:85044095

电源CP-E 24/1.25主开关电源

特点:

额定输出电压24vdc

输出电压可通过前置旋转电位器“输出调节”调节额定输出电流1.25A

额定输出功率30w

宽范围输入100-240 VAC (85-264VAC,90-375v DC)典型效率为86%

低功耗，低发热

自由对流冷却(无强制冷却带通风机)工作环境温度范围-25℃。+70铜路、过载、短路稳定集成输入熔断器

冗余单元CP-RUD提供真正的冗余，可作为附件信号输出“DC OK”(晶体管)输出电压OK led状态指示

认证:UL 508,CAN/CSA C22.2 No.14

额定输入电压为Uw

UL 1310,CAN/CSA C22.2 No.223

(二类电源)

ANSIISA-12.12(1类，Div)2、危险位置)

UL60950,CAN/CSA C22.2 No.60950

批准是指额定输入电压:Uw, GOST

ccc认证指的是额定输入电压，没有ceCEC-Tick标志

订单数据类型

额定输入电压

额定输出电压

指令码

电流CP-E 24/1.25 100-240 VAC。直流24 v / 1.25 a

1svr 427031 r0000

订购资料-附件

类型描述

顺序代码:CP-RUD

冗余单元:1SVR 423418 R9000

CP-RUD提供两个CP-E电源的去耦

单元< 48V和<5A。

应用程序

主开关模式电源提供两个电压输入范围。这使供应与ACor DC。此外，它配备了两个大电容，确保至少30毫秒的市电缓冲(在230伏交流)。这就是为什么该设备可以在全球范围内用于高波动网络和电池供电的工厂。

电源CP-E 24/1.25主开关电源

操作模式

通过电位器，输出调节输出电压可以在24到28 v DC的范围内调节。因此，电源可以最佳地适应应用，例如补偿由长线路长度引起的电压降。

绿色的LED…输出OK在操作过程中是闪电。

CP-E-24-1.25 ABB 开关电源 提供U/输出特性

Basic information

Extended product

Type :CP-E 24/1.25 series

Product Number :1SVR427031RO0oo

Directory description:

CP-E 24/1.25 Power input: 100-24oVAC Output :24VDC/1.25A

Detailed description:

CP-E 24/1.25 is the power supply for the CP-E series. The main switching mode power supply offers a wide input range of 85-264VAC and 90-375vDC, with a rated input voltage of 100-240 v AC. The rated output power is 30 w, the rated output current is 1.25A, and the output voltage is 24v DC. The output voltage can be adjusted in the range of 24 to 28v DC This power supply provides U/ output characteristics and allows parallel operation for redundancy, another feature is that the signal output (transistor) is used for normal output voltage. Redundant units are available as accessories.

category

Products "Low-voltage Products and Systems." Control Product "Power Supply" CP-E

Parts "Medium Voltage Products and systems" Service "Spare Parts and Consumables" Parts "All spare parts (relay-SWG-CB) ordered

Minimum order quantity :1 piece

Customs Code :85044095

Power supply CP-E 24/1.25Primary switch mode power supplyData sheet

Features:

Rated output voltage 24 vDc

Output voltage adjustable via front-face rotary potentiometer"OUTPUT Adjust"Rated output current 1.25A

Rated output power 3o w

Wide range input 100-240 VAC (85-264VAC,90-375v DC)Typical efficiency of 86 %

Low power dissipation and low heating

Free convection cooling (no forced cooling with ventilators)Ambient temperature range during operation -25.       +70  cOpen-circuit,overload and short-circuit stable lntegrated input fuse

Redundancy unit CP-RUD offering true redundancy,  available as accessorySignalling output "DC OK" (Transistor) for output voltage OK LEDs for status indication

Approvals: UL 508,CAN/CSA C22.2 No.14

Approval refers to rated input voltage Uw

UL 1310,CAN/CSA C22.2 No.223

(Class 2 Power Supply)

ANSIISA-12.12 (Class l,Div. 2,hazardous locations)

UL60950,CAN/CSA C22.2 No.60950

Approval refers to rated input voltage: Uw, GOST

ccc Approval refers to rated input voltage uns Marks ceCEC-Tick

Order dataType

Rated input voltage

Rated output voltage

order code

current CP-E 24/1.25, 100-240 VAC. 24v DC/1.25A

1SVR 427031 R0000

Order data - Accessories

Type Description

order code: CP-RUD

Redundancy unit: 1SVR 423418 R9000

The CP-RUD provides decoupling of two CP-E power supply

units < 48V and<5A.

Application

The primary switch mode power supply offers two voltage input ranges.    This enables the supply with ACor DC.                 Furthermore it is equipped with two generous capacitors,  which ensure mains buffering of at least30 ms (at 230 V AC).                That is why the devices can be used  worldwide also in high fluctuating networksand battery-powered plants.

Power supply CP-E 24/1.25Primary switch mode power supplyData sheet

Operating mode

By means of the potentiometer ,OUTPUT Adjust" the output voltage can be adjusted within a range of24 to 28 v DC.  Thus,  the power supply can be optimally adapted to the application,  e.g.compensatingthe voltage drop caused by a long line length.

The green LED ..   oUTPUT OK is lightening during operation.