ABB-RXTUG-22H-1MRK000592-A ABB转换器 稳定直流电压

RXTUG 22H 1MRKO00592-A ABB DC-DC转换器

型号:RXTUG 22H 1MRKO00592-A

品牌:ABB

产品净重:0.6千克

应用

RXTUG 22H 1MRKO00592-A 主要用于辅助电压电源电子电路。适合中等输出时使用需要电力，例如用于提供保护继电器或自动化设备。RXTUG 22H将直接取代RXTUG 21H

设计

RXTUG22H 1MRKO00592-A 将输入直流电压转换为交流电压随后进行变换、整流和平滑到另一个调节和稳定的直流电压。这转换器具有很高的效率，并且可以加载高达20W持续5分钟和连续15W。不对称的可以接受正负U2的负载高达100%额定负载。

转换器的翰入和输出电压为电流分离，有助于抑制任何瞬态发生在输入电压中。向输入端提供电压极化保护，以防止在连接故障的情况下损坏。输出电压由内置辅助继电器监控。

在正常操作过程中，前部的绿色LED将点亮。如果输出短路，转换器退出。当短路消除后，转换器自动重新启动。使用两个并联转换器接收冗余电压电源，次级需要外部二极管连接侧面。符合1MRK 513 019-BEN的RTXE二极管可能是习惯于RTXE二极管安装在端子的后口袋中因此不会增加空间需求。

符合1MRK 513 003-BEN的RTXC分支连接器可能用于方便连接RTXE的接线。COMBIFLEX插座安装在RTXE的导线上。

转换器有以下几种释义：

转换器是指将一种信号转换成另一种信号的装置。信号是信息存在的形式或载体。在自动化仪表设备和自动控制系统中，常将一种信号转换成另一种与标准量或参考量比较后的信号，以便将两类仪表联接起来，因此，转换器常常是两个仪表（或装置）间的中间环节1。

DC/DC转换器是一种将DC（直流）转换为DC（直流）的元件，具体是指利用DC（直流）转换电压的元件。

ABB-RXTUG-22H-1MRK000592-A转换器的优点有：

可以实现不同形式的能量转换，如电信号转换为光信号、电信号转换为机械能、电信号转换为热能等。

具有高效率、高精度、高稳定性等特点，能够满足各种电子设备的工作要求。

转换器具有体积小、重量轻、使用寿命长等优点，能够方便地集成在电子设备中。

转换器的可靠性好，能够在严苛的工作环境下长时间稳定工作。

ABB-RXTUG-22H-1MRK000592-A ABB转换器 稳定直流电压

RXTUG 22H 1MRKO00592-A ABB DC-DC converter

Model :RXTUG 22H 1MRKO00592-A

Brand :ABB

Net weight: 0.6kg

Apply

RXTUG 22H 1MRKO00592-A is mainly used for auxiliary voltage power supply electronic circuits. Suitable for use when power is required for medium output, for example to provide protective relays or automation equipment. RXTUG 22H will directly replace RXTUG 21H,

design

The RXTUG22H 1MRKO00592-A converts the input DC voltage to AC voltage which is then transformed, rectified and smoothed to another regulated and stabilized DC voltage. This converter has high efficiency and can load up to 20W for 5 minutes and 15W continuously. Asymmetrical loads can accept plus or minus U2 up to 100% of the rated load.

The input and output voltages of the converter are separated by current, helping to suppress any transients that occur in the input voltage. Voltage polarization protection is provided to the input to prevent damage in case of connection failure. The output voltage is monitored by a built-in auxiliary relay.

During normal operation, the green LED on the front will light up. If the output shorts out, the converter exits. When the short circuit is eliminated, the converter restarts automatically. Two parallel converters are used to receive the redundant voltage supply, and the secondary requires an external diode to connect the side. RTXE diodes that conform to 1MRK 513 019-BEN May be used to have the RTXE diode installed in the back pocket of the terminal and therefore do not increase space requirements.

RTXC branch connectors conforming to 1MRK 513 003-BEN May be used to facilitate connection of RTXE wiring. The COMBIFLEX socket is installed on the RTXE's wires.

Converter has the following definitions:

A converter is a device that converts one kind of signal into another. Signal is the form or carrier of information existence. In automated instrumentation equipment and automatic control systems, a signal is often converted into another signal after comparison with a standard or reference quantity in order to connect the two types of instruments, so the converter is often an intermediate link between two instruments (or devices) 1.

A DC/DC converter is a component that converts DC (direct current) to DC (direct current), specifically referring to a component that uses DC (direct current) to convert voltage.

The advantages of ABB-RXTUG-22H-1MRK000592-A converters are:

Different forms of energy conversion can be achieved, such as electrical signal conversion to optical signal, electrical signal conversion to mechanical energy, electrical signal conversion to thermal energy.

It has the characteristics of high efficiency, high precision and high stability, and can meet the working requirements of various electronic equipment.

The converter has the advantages of small size, light weight and long service life, and can be easily integrated in electronic equipment.

The reliability of the converter is good, and it can work stably in harsh working environments for a long time.