216DB61-HESG324063R0100-HESG216882A ABB 数字输入模块

ABB 216DB61HESG324063R100 HESG216882是一款数字输入模块，用于连接数字输入信号并将其转换为数字信号输出。以下是ABB 216DB61数字输入模块的参数详情:

通道数:该模块有16个数字输入通道。

输入类型:该模块接受24VDC数字输入信号。

输入范围:输入信号的电流范围为5 mA(最小)到20 mA(最大)。阻抗:输入阻抗为250欧姆。

脉冲计数:该模块支持脉冲计数功能，可以将脉冲转换为数字信号输出。输出类型:数字信号输出，可通过总线接口连接到系统控制器。

通信接口:ABB 216DB61 HESG324063R100 HESG216882使用Profibus DP总线接口进行通信。工作温度:-25℃到+60°℃.

存储温度:-40℃到+85°℃.

湿度范围:5%到95%(无冷凝)。尺寸:71.5 x 124 x 73 mm.

重量:约230克。

作用火灾报警时，报警控制器通过输出模块启动需要联动的外控设备，如防排烟阀、送风阀、防火卷帘门、风机、警铃等，并可接受设备的动作回答。

输出模块连接在控制器的回路总线上，可以安装在所控设备的附近，也可安装在楼层端了模块箱内。采用电子写码，可以现场编码。输出模块的输出控制逻缉可以根据工程情况编程完成。当控制器接收到探测器的报警信号后，根据预先编入的程序，控制器通过总线将联动控制信号输送到输出模块，输出模块启动需要联动的消防设备;设备动作后会接受一个信号回答。

连接:将数字输入信号连接到模块上。ABB 216DB61HESG324063R100 HESG216882有16个数字输入信号通道。输入信号应满足以下规范:24VDC，5 mA(最小）到20 mA(最大)。在连接时，请务必确保正确连接每个输入信号，并避免任何短路或连接不良的情况。

配置:在安装完成后，您需要使用ABB提供的配置工具对设备进行配置。该模块可以通过总线接口连接到系统控制器，并使用ABB提供的配置工具进行操作。配置将确保设备在最佳状态下工作，以达到最佳的性能和稳定性。

使用:一旦设备安装、连接、配置完成，您可以开始使用ABB216DB61。您可以在系统控制器上配置该模块，以便它可以将数字信号输出到其他设备。同时，您还可以在模块上检查LED指示灯以了解设备的运行状态。

总的来说，ABB 216DB61HESG324063R100 HESG216882是一款高效、可靠的数字输入模块，适用于广泛的工业自动化应用。在安装、连接、配置时，请务必按照手册中的说明进行操作，以确保设备的安全和可靠性。

产品规格

所有ABB产品均符合CE和RoHS标准ABB产品的保修期为12个月

ABB产品的设计和制造符合国际标准产品应用

216DB61电机保护断路器适用于各种工业应用，包括泵、风扇、输送机和压缩机。HESG324063R0100电源模块适用于工业自动化、数控机床和其他电子设备。HESG216882A变频驱动器适用于各种工业应用，包括泵、风扇、输送机和压缩机。

216DB61-HESG324063R0100-HESG216882A ABB 数字输入模块

ABB 216DB61HESG324063R100 HESG216882 is a digital input module for connecting digital input signals and converting them into digital signal outputs. The following are the parameters of the ABB 216DB61 digital input module:

Number of channels: The module has 16 digital input channels.

Input type: This module accepts 24VDC digital input signals.

Input range: The current range of the input signal is 5 mA(minimum) to 20 mA(maximum). Impedance: Input impedance is 250 ohms.

Pulse counting: The module supports the pulse counting function, which can convert the pulse into a digital signal output. Output type: Digital signal output that can be connected to the system controller via a bus interface.

Communication interface :ABB 216DB61 HESG324063R100 HESG216882 uses Profibus DP bus interface for communication. Operating temperature :-25℃ to +60 ℃.

Storage temperature :-40℃ to +85 ℃.

Humidity range :5% to 95%(non-condensing). Dimensions :71.5 x 124 x 73 mm.

Weight: Approx. 230g.

When the fire alarm occurs, the alarm controller starts the external control equipment that needs to be linked through the output module, such as smoke exhaust valve, air supply valve, fire shutter door, fan, alarm bell, etc., and can accept the action of the equipment.

The output module is connected to the loop bus of the controller and can be installed near the control device or in the floor end module box. Using electronic coding, can be field coding. The output control logic of the output module can be programmed according to the project situation. When the controller receives the alarm signal of the detector, according to the pre-programmed program, the controller transmits the linkage control signal to the output module through the bus, and the output module starts the fire fighting equipment that needs linkage; The device responds with a signal when it acts.

Connection: Connect the digital input signal to the module. ABB 216DB61HESG324063R100 HESG216882 has 16 digital input signal channels. The input signal should meet the following specifications :24VDC, 5 mA(minimum) to 20 mA(maximum). When connecting, be sure to connect each input signal correctly and avoid any short circuits or poor connections.

Configuration: After the installation, you need to use the configuration tool provided by ABB to configure the device. The module can be connected to the system controller via a bus interface and operated using configuration tools provided by ABB. The configuration will ensure that the equipment works at its best for optimal performance and stability.

Use: Once the device is installed, connected, and configured, you can start using the ABB216DB61. You can configure this module on the system controller so that it can output digital signals to other devices. At the same time, you can also check the LED indicator on the module to understand the operating status of the device.

Overall, the ABB 216DB61HESG324063R100 HESG216882 is an efficient and reliable digital input module for a wide range of industrial automation applications. When installing, connecting, and configuring the device, follow the instructions in the manual to ensure device security and reliability.

Product specification

All ABB products are CE and RoHS compliant ABB products are guaranteed for 12 months

ABB products are designed and manufactured to meet international standards for product applications

The 216DB61 Motor Protection Circuit breaker is suitable for a variety of industrial applications, including pumps, fans, conveyors and compressors. The HESG324063R0100 power module is suitable for industrial automation, CNC machine tools and other electronic equipment. The HESG216882A variable frequency drivers are suitable for a variety of industrial applications, including pumps, fans, conveyors and compressors.