CI858k01 ABB  驱动总线接口

基本信息产品编号:3BSEO18135R1

ABB型号名称:CI858KO1

目录说明:CI858KO1驱动总线接口

详细描述:

封装包括:

- CI858，通信接口- TP858，底板

类别

产品w控制系统产品w控制与通信》AC 8OOM AC 800M-通信模块》cI858驱动总线接口接口CI858KO1驱动总线接口

产品”控制系统”8OOxA 》控制器”AC 8OOM控制软件》AC 8OOM控制软件4.0w通信模块产品》控制系统》8OOxA》控制器”AC 8O0M硬件》AC 8O0M 硬件4.0》通信模块

产品”控制系统》8OOxA”控制器”AC 80OM硬件”AC 8O0M 硬件4.1w通信模块产品》控制系统” 80OxA》控制器”AC 8OOM硬件m AC 8OOM硬件5.o”通信模块

附加信息介质描述:

海关编码:

851762--电话机，包括用于蜂窝网络或其他无线网络的电话;用于传输或接收语音、图像或其他数据的其他设备，包括在有线或无线网络（例如局域网或广域网）中进行通信的设备，标题为84.43、85.25、85.27或85.28的传输或接收设备除外。包括有线或无线网络(如局域网或广域网）中的通信设备:--用于接收、转换和传输或再生语音、图像或其他数据的机器，包括交换和路由设备

海关关税编号:8517620000

尺寸

产品净深度/长度:127.5毫米

产品净高:185毫米

产品净宽:59毫米

产品净重:0.55干克

环境的

RoHS状态:遵活欧盟指令2011/65/EU

报废电子电气设备类别:5.小型设备(外部尺寸不超过5o厘米)

CI858KO1驱动总线接口在机器人应用中，一般指控制器与电机等执行机构之间的通信接口，通过特定的通信协议进行数据交换，实现对电机等执行机构的精确控制。

现场仪表需要采用以下信号类型:2线、4-20 mA模拟输入/翰出。使用数字输入: Potential Free contact。.24 VDC数字输出。平台控制系统必须为控制系统和其他面板之间的信号供电。带有NAMUR 接口的接近开关就位。0.2到1.0 barg是气动信号。如果该概念显示成本节约并满足快速响应的需要，则通过仪表现场总线进行数字通信是一种选择。

虽然面板仪表旨在显示和或调节过程变量，但它们也接收来自现场仪表的信号。该信号可以采用电压、电流或数字信号的形式。指示器、记录器、控制器和显示器都是面板仪表的例子。

CI858k01 ABB  驱动总线接口

Product number :3BSEO18135R1

ABB model name :CI858KO1

Directory Description :CI858KO1 Driver bus interface

Detailed description:

The package includes:

- CI858, communication interface - TP858, mainboard

category

Product w Control System Product w Control and Communication AC 8OOM AC 800M- Communication Module cI858 Driver bus interface CI858KO1 Driver bus interface

Product "Control System" 8OOxA "Controller" AC 8OOM Control Software "AC 8OOM Control Software 4.0W Communication Module Product" Control System "8OOxA" Controller "AC 8O0M Hardware" AC 8O0M Hardware 4.0 "Communication module

Product "Control System" 8OOxA "Controller" AC 80OM Hardware "AC 8O0M Hardware 4.1w Communication Module Product" Control System "80OxA" Controller "AC 8OOM hardware m AC 8OOM Hardware 5.o" Communication module

Additional information Media description:

Customs Code:

851762- Telephones, including telephones for cellular or other wireless networks; Other equipment used to transmit or receive voice, images, or other data, including equipment communicating in a wired or wireless network (such as a local or wide area network), other than transmitting or receiving equipment titled 84.43, 85.25, 85.27, or 85.28. Includes communication equipment in wired or wireless networks (such as local or wide area networks) :- machines used to receive, convert and transmit or regenerate voice, images or other data, including switching and routing equipment

Customs Tariff Number :8517620000

dimension

Product net depth/length :127.5 mm

Net height: 185mm

Product width :59 mm

Net weight :0.55 dry grams

environmental

RoHS status: Compliance with EU Directive 2011/65/EU

Category of discarded electronic and electrical equipment :5. Small equipment (external size does not exceed 5o cm)

CI858KO1 driver bus interface In robot applications, generally refers to the communication interface between the controller and the motor and other actuators, through a specific communication protocol for data exchange, to achieve accurate control of the motor and other actuators.

Field meters require the following signal types: 2-wire, 4-20 mA analog input/outgoing. Use numeric input: Potential Free contact. 24 VDC digital output. The platform control system must power signals between the control system and other panels. Proximity switch with NAMUR interface in place. 0.2 to 1.0 barg is a pneumatic signal. If the concept shows cost savings and meets the need for fast response, digital communication via an instrument fieldbus is an option.

While panel meters are designed to display and or regulate process variables, they also receive signals from field meters. The signal can take the form of a voltage, current or digital signal. Indicators, recorders, controllers, and displays are examples of panel instruments.