KUC711AE101 ABB 电源模块

品牌：ABB

型号：KUC711AE101

电源:24V DC(±15%)数字输入通道:16个

输入类型:开关、传感器或其他数字输入信号电气隔离:通道隔离

输入电压范围:0-30V DC输入电流范围:1 mA - 5 mA数字输出通道:16个

输出类型:继电器或其他数字输出设备电气隔离:通道隔离

输出电压范围:24V DC(最大负载1A)输出电流范围:最大2A

高速计数器:4个

计数频率:最高100 kHz

计数模式:上升沿、下降沿、脉冲宽度等通信接口:

Ethernet:支持Modbus TCP、TCP/IP串口:支持Modbus RTU

PROFIBUS DP

工作温度:-25°C ~ +70°℃

外形尺寸(宽x高x深) :141 x 106 x 70 mm重量:约1400克

1.电源输出:ABB KUC711AE1013BHB004661R0101电源模炔主要功能之一是提供稳定的电源输出，以满足系统和设备的电力需求。

2电压调节:一些ABB KUC711AE1013BHBO004661R0101电源模块О可能具有电压调节功能，以便根据需求调整揄出电压。

3.电流保护:ABB KUC711AE1013BHB004661R0101电源模块通常具有电流保护功能，以防止过电流情况对系统和设备造成损害。

4.过载保护:一些模块可能支持过载保护，以防止过高的负载情况。

5.热保护:ABB KUC711AE1013BHB004661R0101电源模块可能具有热保护功能，以防止过热情况。

6.故障检测:模块可能支持故障检测和报警功能，帮助识别电源问题并提供警报。

7.电源过蹰:ABBKUC711AE1013BHB004661R0101电源模块可能具有电源过滤功能，以减少电源中的干扰和噪声。

8.电源监测:一些模块可能支持电源监测功能，以监测电源的状态和性能。

9.冗余性:在一些应用中，ABB KUC711AE1013BHB004661R0101电源模块可能支持冗余配置，以确保系统的可靠性。

KUC711AE101 ABB 电源模块

Brand: ABB

Model: KUC711AE101

Power supply :24V DC(±15%) Digital input channels :16

Input type: Switch, sensor, or other digital input signal Electrical isolation: channel isolation

Input voltage range :0-30V DC Input current range :1 mA - 5 mA Digital output channels :16

Output type: Relays or other digital output devices Electrical isolation: channel isolation

Output voltage range :24V DC(maximum load 1A) Output current range: maximum 2A

High speed counter :4

Counting frequency: up to 100 kHz

Counting mode: rising edge, falling edge, pulse width and other communication interfaces:

Ethernet: supports Modbus TCP, TCP/IP Serial port: supports Modbus RTU

PROFIBUS DP

Operating temperature :-25°C ~ +70° C

Overall dimensions (W x H x D) :141 x 106 x 70 mm Weight: about 1400 grams

1. The power supply output: ABB KUC711AE1013BHB004661R0101 power supply module and acetylene one of the main function is to provide stable output power, in order to satisfy the demands of system and equipment of electric power.

ABB О KUC711AE1013BHBO004661R0101 power supply module 2 voltage regulation: some may have a voltage regulating function, in order to adjust am currently out of the voltage according to demand.

3. Current protection: ABB KUC711AE1013BHB004661R0101 power module usually has a current protection function, in order to prevent the over current situation on the system and equipment damage.

4. Overload protection: Some modules may support overload protection to prevent excessive load situations.

5. Thermal protection: ABB KUC711AE1013BHB004661R0101 power supply module may have thermal protection function, to prevent overheating.

6. Fault detection: The module may support fault detection and alarm functions to help identify power problems and provide alerts.

7. The power lead Chu: ABBKUC711AE1013BHB004661R0101 power supply module may have a power supply filter function, in order to reduce the interference and noise of the power supply.

8. Power monitoring: Some modules may support power monitoring functions to monitor the status and performance of the power supply.

9. Redundancy: in some applications, ABB KUC711AE1013BHB004661R0101 power module may support redundant configuration, to ensure the reliability of the system.