PBSE1095  ABB 能源转换

PBSE1095的规格如下:

尺寸:100mm x 100mm x 100mm

重量:1 kg

外壳材料:铝合金防护等级:IP65

描述

PBSE1095 ABB

因此DC3将成为一种全数字化的系统。在以往采用模拟式变送单元和执行单元时，系统与现场之间是通过模拟信号线连接的，而在实现全数字化后，系统与现场之间的连接也将通过计算机数字通信网络，即现场总线实现连接，这将彻底改变整个控制系统的面貌。

PBSE1095主要用于太阳能电池板系统和风能电池板系统的能量转换。它可以将太阳能电池板和风能电池板捕获的能量转换成电能，并将其传输到目标设备。PBSE1095也可以用于其他类似的应用，如电动汽车充电站和工业自动化设备等。

ND01至ND17型线路电抗器的尺寸取决于装置的标称电流和频率(50 / 60

赫兹)。这些英国量为1%的线路电抗器设计用于工业环境(最小值)

要求)。它们具有低感性压降，但换向槽口较深。

线路电抗器NDO1至NDO6配有电缆。较大的配备NDO7至ND17

带母线。将它们连接到其他组件时，请考虑相关标准

案例母线材料不同。

ND401至ND413型线路电抗器的尺寸取决于装置的标称电流和频率(50/

60赫兹)。这些英国量为4%的线路电抗器设计用于轻工业/住宅

环境。它们具有高感性压降，但减少了换向凹口。这些行

电抗器设计用于驱动器，通常在400或500 VAC的速度控制模式下运行

电源。因此，必须考虑负载循环。

PBSE1095  ABB 能源转换

The specifications of PBSE1095 are as follows:

Size :100mm x 100mm x 100mm

Weight :1 kg

Shell material: Aluminum alloy protection grade :IP65

Description

PBSE1095 ABB

So DC3 will be a fully digital system. In the past, when the analog transmitter unit and the execution unit were used, the system and the site were connected through the analog signal line, and after the realization of full digitization, the connection between the system and the site will also be connected through the computer digital communication network, that is, the fieldbus, which will completely change the face of the entire control system.

PBSE1095 is mainly used for energy conversion of solar panel systems and wind panel systems. It can convert energy captured by solar panels and wind panels into electricity and transmit it to the target device. PBSE1095 can also be used in other similar applications, such as electric vehicle charging stations and industrial automation equipment.

The size of type ND01 to ND17 line reactors depends on the nominal current and frequency of the device (50/60

Hertz). These UK volume 1% line reactors are designed for use in industrial environments (minimum)

Request). They have a low inductive pressure drop, but the commutation notch is deep.

Line reactors NDO1 to NDO6 are equipped with cables. The larger ones are equipped with NDO7 to ND17

With bus bar. Consider the standards when connecting them to other components

Case bus material is different.

The size of type ND401 to ND413 line reactors depends on the nominal current and frequency of the device (50/

60 Hertz). These UK 4% line reactors are designed for light industrial/residential use

The environment. They have a high inductive pressure drop but reduced commutation notch. These rows

The reactor is designed for use as a drive and usually operates in speed control mode of 400 or 500 VAC

Power. Therefore, the load cycle must be considered.