ABB PFEA113-65 3BSE050092R65  传感器

【功能描述】

ABB PFEA113-65 3BSE050092R65 传感器已经在当今许多行，得到广沙应里，特别是在工业生产测量领域。张力传感器的优点是安装简单，使里户

更，适用于吊秤，称重机，改装秤和电子测力系统。环形张力传感器板因名称相同而更适合于大范围，恶劣的工作环竞，良好的频率响应，许多用干建材，水泥，化工，起重，起重等。

另外，张力传感器还应用造纸业，制药、化学，食品、钢厂、箔生产厂、电缆铺设和锯木厂等机器中，话用需成批处理

立业的高质量液压元件及仪器的使用。

ABB PFEA113-65 3BSE050092R65 张力传感器在制药领域的典型应用是在工厂的加工过程中对处理相应处方的搅动容器的称量。而在印刷行业，张力传感

据把采集纸张的张力信号传给控制器，而控制器根据信号则去调节放卷及收卷的速度来达到张力的平衡，及节省了成本的浪费又提高了产量。在印刷机中需要印刷套准检测，墨量和水量，纸张故障等各种检测。而它所使用的则是位移型。张力传感器的安装:

张力传感器的安装分为两种，第一种是利用轴承座固定用螺栓孔把轴承座固定在底座上。另一种是利用选装板固定轴承

座的方法，安装时重要注意的是导致张力测量不准的原因，在张力传感设备接信号线，开关量与输出端子坐弱申纯的时

候尽量远离强电线，以免电磁信号对张力检测产生干扰。而在实际的应用中输出灵敏度，温度补偿范围，零点温度影向，额定载荷，极限符合等因素也是影响张力测量不准的原因。使用注意事项:

1.安装张力检测器和轴承座的螺丝不能过长，过长会导致张力检测器的簧片无法正常工作而检测不到张力。

2.利用侧面固定时，固定螺丝不能过长，否则将导致张力检测器内测量机构损坏。

3.张力检测器在任何时候都不能手强烈撞击或害动，否则会导致张力检测器损坏。

ABB PFEA113-65 3BSE050092R65  传感器

The ABB PFEA113-65 3BSE050092R65 sensor has been found in many lines today and is widely used, especially in the field of industrial production measurement. The advantage of the tension sensor is that it is simple to install and makes the household

Moreover, it is suitable for hanging scales, weighing machines, modified scales and electronic force measuring systems. Ring tension sensor plate because of the same name and more suitable for a large range, bad working ring competition, good frequency response, many with dry building materials, cement, chemical, lifting, lifting and so on.

In addition, tension sensors are also used in the paper industry, pharmaceutical, chemical, food, steel mills, foil production plants, cable laying and sawmills and other machines, which require batch processing

The use of high quality hydraulic components and instruments.

A typical application of the ABB PFEA113-65 3BSE050092R65 tension sensor in the pharmaceutical field is to weigh the stirred container handling the corresponding prescription during processing in the factory. And in the printing industry, tension sensing

According to the collection of paper tension signal to the controller, and the controller according to the signal to adjust the unwinding and winding speed to achieve the balance of tension, and save the cost of waste and increase the output. In the printing press, it is necessary to detect the printing register, the amount of ink and water, the paper failure and other tests. And it uses the displacement type. Tension sensor installation:

The installation of the tension sensor is divided into two types, the first is to use the bearing seat fixed with a bolt hole to fix the bearing seat on the base. The other is to use the optional plate fixed bearing

When installing the method, it is important to pay attention to the causes of inaccurate tension measurement, when the tension sensing device is connected to the signal line, the switching quantity and the output terminal are weak and pure

Try to stay away from strong wires, so as not to interfere with electromagnetic signals on tension detection. In practical application, the output sensitivity, temperature compensation range, zero temperature shadow direction, rated load, limit conformity and other factors are also the reasons that affect the inaccurate tension measurement. Precautions for use:

1. The screws for installing the tension detector and bearing seat should not be too long, which will cause the reed of the tension detector to fail to work properly and no tension can be detected.

2. When using side fixing, the fixing screws should not be too long, otherwise it will cause damage to the measuring mechanism in the tension detector.

3. The tension detector should not be strongly impacted or harmed at any time, otherwise it will cause damage to the tension detector.

ABB PFEA113-65 3BSE050092R65  传感器

【联系我们】

厦门雄霸电子商务有限公司

厦门市思明区吕岭路1733号创想中心2009-2010单元

联系人：珊妮

电话：18059884797

电子邮件：2082431634 @qq.com

QQ：2082431634

【常问问题】

1.保修怎么样？

所有产品均享有1年保修。

2.什么是交货时间？

通常1-3个工作日