ABB OCAH 940181103 数字输入终端模块

ABB OCAH 940181103 工控备件模块备件

随着*** MC 3603 的推出，运动控制器现在涵盖了微型电机和微型电机的整个典型应用范围（图 2），从邮票尺寸的 MC 3001 开始，具有 30 W 和 1 A（峰值电流 2 A）直到 MC 5010，该系列中的成员具有 10 A（峰值电流 30 A），专为安装在开关柜中而设计，主要在工业领域进行了试验和测试。所有运动控制器都符合当前的 EMC 规定。这就是为什么驱动***们非常详细地探讨了这个复杂的话题。不仅硬件得到了适当的优化，文档也经过了重新设计，为用户在自己设备的认证过程中提供的支持。系统的软件设计根据硬件结构的总体划分，也可以分为两大部分来描述。整个系统的运行如图2所示，FPGA和DSP各自的程序独立运行，通过中断信号完成数据的实时交互。FPGA向DSP方向的指令是通过FPGA发送一个EDMA请求，DSP通过响应EDMA请求，建立EDMA通道，开始从FIFO中进行预处理后数据的读取，DSP向FPGA传输数据时，通过向FPGA发送一个中断信号，让其从FIFO中把压缩后的图像数据读出来。

ABB OCAH 940181103 工控备件模块备件

With the introduction of *** MC 3603, the motion controller now covers the whole typical application range of micro-motors and micro-motors (Figure 2), starting from the stamp-sized MC 3001, with 30 W and 1 A (peak current 2 A) until MC 5010. The members in this series have 10 A (peak current 30 A), which is specially designed for installation in switchgear, and has been tested and tested mainly in the industrial field. All motion controllers comply with current EMC regulations. This is why the drivers have discussed this complicated topic in great detail. Not only the hardware has been properly optimized, but also the document has been redesigned to provide support for users in the authentication process of their own equipment.

ABB OCAH 940181103 工控备件模块备件