216DB61-HESG324063R100-H  |  输入模块

型号：216DB61-HESG324063R100-H

输入模块是一种用于接收信号输入并将输入的设备作为系统一部分的组件。

功能作用：

216DB61-HESG324063R100-H监视接收消火栓按钮、手动报警按钮、水流指示器、压力开关、继电器接点、信号阀等开关量报警信号。

通过总线送入报警控制器，由报警控制器发出声光报警信号、指示具体报警地址。

报警控制器还可发出有关联动控制指令，控制某些消防设备投入运行。

技术参数

工作电压：总线电压24V，电源电压DC24V。

监视电流：总线电流≤1mA，电源电流≤6mA。

动作电流：总线电流≤4mA，电源电流≤35mA。

输出容量：DC24V/1A（两组输出最大容量之和为DC24V/1A）。

输出控制方式：脉冲、电平（继电器常开/常闭无源触点输出，脉冲启动时继电器吸合时间为10s）

Model: 216DB61-HESG324063R100-H

The 216DB61-HESG324063R100-H input module is a component for receiving signal input and using the input device as part of the system.

Function:

216DB61-HESG324063R100-H Monitors and receives fire hydrant button, manual alarm button, water flow indicator, pressure switch, relay contact, signal valve and other switch alarm signals.

It is sent to the alarm controller through the bus, and the alarm controller sends an audible and visual alarm signal to indicate the specific alarm address.

The alarm controller can also issue related linkage control commands to control some fire equipment into operation.

Technical parameters 

Working voltage: bus voltage 24V, power supply voltage DC24V.

Monitoring current: bus current ≤1mA, power current ≤6mA.

Operating current: bus current ≤4mA, power current ≤35mA.

Output capacity: DC24V/1A (The sum of the two maximum output capacities is DC24V/1A).

Output control mode: pulse, level (relay normally open/normally closed passive contact output, pulse start relay suction time is 10s)