3BSE053241R1 （PM891K01） 处理器  板载通信端口

基本信息

货号 ：3BSE053241R1 （PM891K01）

冗余 ：不

高完整性：不

时钟频率 ：450兆赫

性能，1000 个布尔运算：0.043 毫秒

性能 0.043 毫秒

记忆 256兆字节

RAM可用于应用：208.985 兆字节

用于存储的闪存：是的

详细数据

环境与认证

尺寸

宽度 ：174毫米（6.85英寸）

高度 ：186毫米（7.32英寸）

深度 ；94毫米（3.70英寸）

重量（包括底座):1600 克（3.5 磅）

PM891 处理器是配备电源、CPU 板和单元终端的单片单元。该装置包含微处理器和RAM存储器、实时时钟、LED指示灯、INIT按钮和安全数字接口。PM891 不包含任何内置电池 PM891 有两个 RJ45 以太网端口（CN1、CN2）用于连接到控制网络，以及一个 RJ45 串行端口 （COM4）。COM4 端口是隔离的，用于配置工具。PM891 支持 CPU 冗余，以实现更高的可用性（CPU、CEX-Bus、通信接口和 S800 I/O）。

通信扩展总线（CEX-Bus）安装在本机上。CEX-Bus用于扩展带有通信接口单元的板载通信端口。可以在CEX-Bus上使用冗余通信接口。CEX-Bus 互连单元 BC810 用于通过将 CEX-Bus 划分为单独的段来提高 CEX-Bus 的可用性。该单元的光纤模块总线可用于连接七个 S800 I/O 单元集群（每个集群最多包含 12 个单元）。每个 PM891 都有一个唯一的以太网地址，为设备提供硬件标识。

特点和优势

可靠性和简单的故障诊断程序

模块化，允许逐步扩展

IP20 级防护等级，无需外壳

该控制器具有完整的EMC认证

高性能和大容量应用内存

使用一对 BC810 的分段 CEX-Bus

内置冗余以太网通信端口

Basic information

Item Number: 3BSE053241R1 (PM891K01)

Redundancy: No

High integrity: No

Clock frequency: 450 MHZ

Performance, 1000 Boolean operations: 0.043 ms

Performance 0.043 ms

Memory 256 megabytes

RAM available for application: 208.985 megabytes

Flash memory for storage: Yes

Detailed data

Environment and certification

dimension

Width: 174 mm (6.85 in)

Height: 186 mm (7.32 in)

Depth; 94 mm (3.70 in)

Weight (including base):1600 g (3.5 lb)

The PM891 processor is a single chip unit with a power supply, CPU board, and unit terminal. The device includes a microprocessor and RAM memory, real-time clock, LED indicator, INIT button, and secure digital interface. The PM891 does not contain any built-in batteries The PM891 has two RJ45 Ethernet ports (CN1, CN2) for connecting to the control network, and a RJ45 serial port (COM4). The COM4 port is isolated and used for configuration tools. The PM891 supports CPU redundancy for higher availability (CPU, CEX-Bus, communication interface, and S800 I/O).

The Communication Extension Bus (CEX-Bus) is installed on this machine. The CEX-Bus is used to extend the onboard communication port with a communication interface unit. Redundant communication interfaces can be used on the CEX-Bus. The CEX-Bus interconnect unit BC810 is used to improve the availability of the CEX-Bus by dividing the CEX-Bus into separate segments. The unit's fiber module bus can be used to connect up to seven clusters of S800 I/O units (each cluster contains up to 12 units). Each PM891 has a unique Ethernet address that provides a hardware identity for the device.

Characteristics and advantages

Reliable and simple troubleshooting program

Modular, allowing for gradual expansion

IP20 protection class, no enclosure required

The controller has full EMC certification

High performance and large application memory

Use a pair of BC810 segment CEX-Bus

Built-in redundant Ethernet communication port