CI854B  3BSE069449R1 AC 800M 通信接口  可实现线路冗余

基本信息

型号：CI854B

货号 3BSE069449R1 （CI854BK01）

通信协议 PROFIBUS DP-V1系列

主站或从站 主人

通道数 2

传输速度 9.6 - 12 000 kbit/秒

线路冗余 是的

模块冗余 是的

热插拔 是的

与 HI 控制器一起使用 是的

PROFIBUS DP 是一种高速多用途总线协议（高达 12Mbit/s），用于互连现场设备，如远程 I/O、驱动器、低压电气设备和控制器。PROFIBUS DP 可以通过 CI854B 通信接口连接到 AC 800M。CI854B包括两个PROFIBUS端口，可实现线路冗余，还支持PROFIBUS主站冗余。

PROFIBUS-DP通信通过使用两个CI854B通信接口模块支持主冗余。主冗余可以与 CPU 冗余和 CEXbus 冗余 （BC810） 结合使用。这些模块安装在DIN导轨上，可直接与S800 I/O系统以及其他I/O系统连接，包括所有PROFIBUS DP/DP-V1和FOUNDATION现场总线系统。

PROFIBUS DP 必须在最外层的两个节点端接。这通常是通过使用带有内置端接的连接器来完成的。为了保证正确的工作端接，必须插入连接器并供电。

封装包括：CI854BK01通信接口和 TP854 底板。

（仅与 System 800xA 6.0.3.2、Compact Control Builder 6.0.0-2 及更高版本兼容。有关详细信息，请参阅产品更新。

特点和优势

用于通过 PROFIBUS DP 连接远程 I/O 和现场总线仪表

可通过 PROFIBUS 连接设备 LD 800P 将 PROFIBUS PA 连接到 CI854B

CI854B 可以设置为冗余

详细数据

CEX总线上的最大单位数 12

连接器 DB 母头（9 针）

24 V 典型功耗 190毫安

环境与认证

温度，工作 +5 至 +55 °C （+41 至 +131 °F）

温度、储存 -40 至 +70 °C（-40 至 +158 °F）

污染程度 根据 IEC/EN61131-2 的 2 级

防腐 符合 ISA 71.04 的 G3 标准

防护等级 IP20 符合 EN60529 IEC 529 标准

CE标志 是的

船用证书 ABS、BV、DNV-GL、LR

符合RoHS标准 指令/2011/65/EU （EN 50581：2012）

WEEE合规性 指令/2012/19/EU

Basic information

Model: CI854B

Item No. 3BSE069449R1 (CI854BK01)

Communication protocol PROFIBUS DP-V1 series

Master or slave master

Number of channels 2

Transmission speed 9.6-12 000 kbit/ s

Line redundancy Yes

Module redundancy Yes

Hot swap Yes

Used with HI controller Yes

PROFIBUS DP is a high-speed multipurpose bus protocol (up to 12Mbit/s) for interconnecting field devices such as remote I/O, drives, low-voltage electrical equipment, and controllers. The PROFIBUS DP can be connected to the AC 800M via the CI854B communication interface. The CI854B includes two PROFIBUS ports for line redundancy and also supports PROFIBUS master station redundancy.

PROFIBUS-DP communication supports primary redundancy through the use of two CI854B communication interface modules. Primary redundancy can be used in combination with CPU redundancy and CEXbus redundancy (BC810). The modules are mounted on DIN rails and can be directly connected to the S800 I/O system as well as other I/O systems, including all PROFIBUS DP/DP-V1 and FOUNDATION fieldbus systems.

PROFIBUS DP must be terminated at the outermost two nodes. This is usually done by using a connector with a built-in termination. In order to ensure proper working termination, the connector must be inserted and powered.

Package includes: CI854BK01 communication interface and TP854 baseboard.

Compatible only with System 800xA 6.0.3.2, Compact Control Builder 6.0.0-2 and later. For more information, see Product Updates.

Characteristics and advantages

Used to connect remote I/O and fieldbus meters via PROFIBUS DP

The PROFIBUS PA can be connected to the CI854B via the PROFIBUS connection device LD 800P

The CI854B can be set to redundancy

Detailed data

The maximum number of units on the CEX bus 12

Connector DB female (9 pins)

Typical power consumption of 24 V is 190 mA

Environment and certification

Temperature, operating +5 to +55 °C (+41 to +131 °F)

Temperature, storage -40 to +70 °C (-40 to +158 °F)

Pollution level according to IEC/EN61131-2 Level 2

Corrosion protection complies with ISA 71.04 G3 standard

Protection class IP20 complies with EN60529 IEC 529 standard

CE mark Yes

Marine Certificate ABS, BV, DNV-GL, LR

Compliance with RoHS Standard Directive /2011/65/EU (EN 50581:2012)

WEEE Compliance Directive /2012/19/EU